Alternative to ginput for selecting data from an image?

Question

Emma 2016-8-26

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/301018-alternative-to-ginput-for-selecting-data-from-an-image

回答： Image Analyst 2016-8-27

I've got an image with pixels that are 0.1 units in x and 0,1 units in y. I want to have a user select some number 'n' points on that image and assign the x,y coordinates of those selections to a variable. I have tried to use "ginput" to do this, but there is one issue. When using ginput, if I click in the pixel (1.1, 3.2), for example, I might get values of (1.12034, 3.259034) when what I want is (1.1, 3.2). If I use the data cursor, it provides (1.1, 3.2) but I don't know how to automatically get those values into a variable.

I suppose I could round the coordinates down to the nearest 0.1, but the pixel size will not always be the same and I'd prefer to have a slightly more elegant solution. Is there another function similar to ginput that provides the x,y values of a point in the same way that the datacursor does?

Thanks!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2016-8-26

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/301018-alternative-to-ginput-for-selecting-data-from-an-image#answer_232874

在 MATLAB Online 中打开

Sorry if I'm asking the obvious, but did you try round()?

[x,y] = ginput(1);
x = round(x, 1);
y = round(y, 1);

5 个评论
显示 3更早的评论隐藏 3更早的评论

Emma 2016-8-26

Ok. Perhaps I am not explaining myself clearly enough.

First, I am not using a GUI.

I have a function where I am creating an Affine transformation matrix using two images. I need to choose four corresponding points from each image in order to solve for the Affine transformation from one image to the other. I would like to have the program prompt the user to click on the four points of each image and save the coordinates of those points.

When the image opens, it looks like this:

Using the data cursor on the point shown above provides [X,Y] = [-0.15, -0.08], which is what I want. However, I can't figure out how to assign those values to variables in my code. In other words, I would need to manually enter the values -0.15 and -0.08.

If a user uses ginput and clicks on that same point, however, they might get [-0.148972, -0.08330952] or [-0.15110238, -0.084001210].

Now, you suggested I use round(). The problem with this is that the pixels will not always be 0.01 units, so round(X,2) will not always accomplish what I need. Sometimes it will be round(X,1) or round(X,4). Sometimes the pixel size will not be a factor of 10 at all, but something like 0.3, in which case round() will not help at all.

Image Analyst 2016-8-26

在 MATLAB Online 中打开

ginput() will give you those values. If you want to see the values "live" as you mouse around, call impixelinfo() after you display it.

imshow(......
hp = impixelinfo();
h.Position = [left, top, width, height]. % You supply the actual numbers.

Emma 2016-8-26

No, ginput() does not give me [X,Y] = [-0.15, -0.08], it gives me [X,Y] = [-0.148972, -0.08330952] or [X,Y] = [-0.15110238, -0.084001210] or whatever else depending on where exactly within the pixel I click. That is what I do not want.

请先登录，再进行评论。

Answer 2

Image Analyst 2016-8-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/301018-alternative-to-ginput-for-selecting-data-from-an-image#answer_232884

在 MATLAB Online 中打开

You need to use UpdateFcn. See this demo. This is all in my test3.m file:

function test3
sampleImage=[...
  2 3 5 7 1
3 3 7 9 4
0 1 9 7 8]
imshow(sampleImage, [], 'InitialMagnification', 1600);
% Set up figure properties:
% Enlarge figure to full screen.
set(gcf, 'Units', 'Normalized', 'OuterPosition', [0 0.5 1 .5]);
% Give a name to the title bar.
set(gcf, 'Name', 'Demo by ImageAnalyst', 'NumberTitle', 'Off') 
uiwait(msgbox('Please click on the data cursor icon on the toolbar, then click in the image and look in the command window.'));
dcm_obj = datacursormode(gcf) 
set(dcm_obj,'UpdateFcn',@MyUpdateFunction)
function pos = MyUpdateFunction(~, event_obj)
% ~            Currently not used (empty)
% event_obj    Object containing event data structure
% output_txt   Data cursor text (string or cell array of strings)
pos = get(event_obj,'Position');
fprintf('You clicked at X = %.4f, Y = %.4f\n', pos(1), pos(2));

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Alternative to ginput for selecting data from an image?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（2 个）

5 个评论
显示 3更早的评论隐藏 3更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Alternative to ginput for selecting data from an image?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（2 个）

5 个评论 显示 3更早的评论隐藏 3更早的评论

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

5 个评论
显示 3更早的评论隐藏 3更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论