How to implement a TCP/IP connection to Lego Mindstroms EV3 hardware?

2 次查看（过去 30 天）

Benedict Bauer 2017-1-10

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/319873-how-to-implement-a-tcp-ip-connection-to-lego-mindstroms-ev3-hardware

评论： Vinod 2017-4-18

Hello everybody,

has someone some hints about to develop a TCP/IP connection to Lego Mindstorms EV3 hardware? I have the feeling, that the TCP/IP Send and Receive blocks from the Instrument Control Toolbox does not work with the EV3 hardware. At least in the list of Instrument Control Toolbox Supported Hardware is no Lego Mindstorms EV3 and it does not work.

Thanks for your help!

Best regards Benedict

2 个评论
显示无隐藏无

Benedict Bauer 2017-4-16

Hello there,

unfortunately, the problem still exists. Is there anyone who can give me a few tips where to start?

Thank you very much!

Best regards Benedict

Vinod 2017-4-18

Could you explain more why you need your own TCP/IP connection to the EV3? Does the functionality in the support package not meet your needs? What specific functionality are you looking for?

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Vinod 2017-1-12

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/319873-how-to-implement-a-tcp-ip-connection-to-lego-mindstroms-ev3-hardware#answer_250281

编辑：Vinod 2017-1-12

Are you sure you really want to do it at that low level?

Perhaps the LEGO Mindstorms EV3 I/O hardware support package is what you need?

3 个评论
显示 1更早的评论隐藏 1更早的评论

Vinod 2017-1-12

You could install the MATLAB support package and look at the source code. Just be prepared that coming up with your own protocol for communication could be a non trivial task.

Benedict Bauer 2017-1-13