IMPULSE AND STEP RESPONSE
21 次查看(过去 30 天)
显示 更早的评论
I know that 'stepz' and 'impz' can be used to find the step and impulse response of a digital filter when numerator and denominator coefficients are given as arguments. How I can I find the above responses for a continuos time system using the numerator and denominator coefficients? Please clarify
0 个评论
采纳的回答
Richard Zappulla
2017-1-17
编辑:Richard Zappulla
2017-1-17
Hi,
Quite simply, you can use the step() and impulse() commands given a continuous-time system. The inputs to these commands is a transfer function generated using the tf(numerator_coeffs, denomenator_coeffs). If you do not specify an output to these functions, they will generate a plot with impulse or step response respectively. If you specify an output, then it is left you to plot the results.
I would encourage you to review the help files for each command, but below is a code snippet to get you going.
transFcn = tf([1], [1,1]) % Transfer function for the system 1/(s+1)
impulse(transFcn); % Generates impulse response
[y, t] = step(transFcn); % Generates response and time
figure(1), clf, plot(t, y), xlabel('Time'), ylabel('Response'), title('Step Response');
Hope this helps!
EDIT: swapped arguments in the plot() fcn call to match axis labels
更多回答(1 个)
Girma
2024-1-11
transFcn = tf([1], [1,1]) % Transfer function for the system 1/(s+1)
impulse(transFcn); % Generates impulse response
[y, t] = step(transFcn); % Generates response and time
figure(1), clf, plot(t, y), xlabel('Time'), ylabel('Response'), title('Step Response');
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Get Started with Control System Toolbox 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!