The problem is that i am getting negative values of kp and ki, how i can get value in specific range?

Question

zain yousaf 2017-7-9

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347943-the-problem-is-that-i-am-getting-negative-values-of-kp-and-ki-how-i-can-get-value-in-specific-range

评论： zain yousaf 2017-7-12

PSO.m

    function F = tracklsq(pid)
         syms x;
         limit_1 = 0;
         limit_2 = 10;
         Area = int(x,limit_1, limit_2);
         Kp = pid(1);
         Ki =  pid(2);
         z=Kp*0.1+Ki*0.1*Area; %objective function
         sys_overshoot=z-1; % compute the overshoot
         alpha=10;beta=10;
         F=0.1*2*beta+sys_overshoot*alpha;
    end

PSO code is attached

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2017-7-10

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347943-the-problem-is-that-i-am-getting-negative-values-of-kp-and-ki-how-i-can-get-value-in-specific-range#answer_273543

在 MATLAB Online 中打开

Your pso code has

current_position = 10*(rand(dim, n)-.5);

rand() is going to be in the range 0 to 1, so rand() - 0.5 is going to be in the range -0.5 to +0.5; 10 times that would be -5 to +5 .

If you do not want negative inputs, then do not subtract .5 in this statement.

8 个评论
显示 6更早的评论隐藏 6更早的评论

Walter Roberson 2017-7-11

在 MATLAB Online 中打开

In your update loop you have

velocity = w *velocity + c1*(R1.*(local_best_position-current_position)) + c2*(R2.*(globl_best_position-current_position));

Suppose that current_position is a fair bit more positive than local_best_position or globl_best_position, then (local_best_position-current_position) or (globl_best_position-current_position) could get fairly negative. The R2 values are rand 0 to 1, but c2 is 1.2, so the last part of the calculation could be negative up to 1.2 times distance the current position is relative to the global best, and the c1*(R1.*(local_best_position-current_position)) could be contributing even more negative. The previous velocity could have been negative as well. Put these three negative components together and you can easily get a velocity that is more negative than the current position is positive, leading to a negative after the velocity is added to the current position.

Within tracklsq you calculate Area as a symbolic integral between fixed limits. The result would be a constant (in particular, 50), but in symbolic form. That forces other calculations into symbolic form, which is leading to a lot of performance loss. It is not obvious why you use a constant calculation for Area there.

At the end of your program you have

            xx=fitness(:,n);
            [Y,I] = min(xx);
            current_position(:,I)

However, you never updated fitness and so the array is all 0. You have already calculated the best value: it is in global_best_fitness, and the corresponding point is any entry in globl_best_position (all of the entries are the same for that array, by design.)

Walter Roberson 2017-7-12

? How do you get from those minimizations in the paper to your u expression ??

zain yousaf 2017-7-12

i am choosing some random values of error, in the case of I-Iref, i set that equal to 0.1,and interms of integration, i am setting some limits and using integrating function to integrate t, in my code area=t. i hope u get my point. in this paper there is no transfer function, so i am not sure that should i use transfer function or not.

请先登录，再进行评论。

The problem is that i am getting negative values of kp and ki, how i can get value in specific range?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

8 个评论
显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

The problem is that i am getting negative values of kp and ki, how i can get value in specific range?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

8 个评论 显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论