How can I solve this problem?
1 次查看(过去 30 天)
显示 更早的评论
I am applying three different motion input to three different joints. and simulink is giving this error.
采纳的回答
Birdman
2017-11-28
I am not sure, but please make sure that number of AUTOMATICALLY COMPUTED and PROVIDED BY INPUT motions are equal provided by all joints in your model.
29 个评论
Birdman
2017-11-29
No, you said that you apply motion and torque to some joints. But also, torques have to be automatically computed for the ones you apply motion and vice versa.
bayram özmen
2017-11-29
Yes I can. But I want to ask one more question. I am applying a motion to one joint. but the other ones behave like this joint. why happened like this? I want to apply different motion for each joint. how can ı do this?
Birdman
2017-11-29
Then, you need to set actuation as Motion and you need to automatically compute torques.
bayram özmen
2017-11-29
yes I did like that. please can you investigate my simulink model? ı will achieve a constant angle but ı need a motion that have angular displacement angular velocity and angular acceleration. then they will be entered to one simulink to converter. Which units I should choose? Do you think my algoritma is correct?
Birdman
2017-11-29
As units, I think rad,rad/s,rad/s^2 are allowed. Your algorithm looks okay but maybe the differential equations can not be solved for the inputs you provide. Therefore make sure to give reasonable inputs to your model. That's all I can say without looking at your model on Simulink.
bayram özmen
2017-11-29
You are so helpful. thank you so so much for your interest. I adjusted the unit as rad. But the results of my kinematic equations are constand value as rad. I applied this to achieve a motion in figure below. But ı applied to joint this. joint did not motion. just stay that position angle. ı want to stay that position by acting. Thats why what should I apply as input?
Birdman
2017-11-29
But if you apply position command, then it will automatically go to that position and stay.
bayram özmen
2017-11-29
right I want to stay in that position. But I want to rotate that piece that connect to motor.(circle in figure)
Birdman
2017-11-29
Oh, you are trying to implement a ball-plate system. That's nice :)
Well, I suggest you to use spherical joint for that connection point to the motor. Spherical joints can rotate in three axis but do not change their positions.
bayram özmen
2017-11-29
But spherical joint only one torque input. How can I set angle that I want? Also you mean these spherical joints that connect to motorkol in figure.
Birdman
2017-11-29
The motions will be automatically computed once you apply the reasonable torque values.
bayram özmen
2017-11-29
you try to tell me, you apply to torque for desired angle. Final position will be desired angle. ı understand true? But ı should apply torque input to revolute joint or spherical joint?
Birdman
2017-11-29
Apply torque input to spherical joint. If you constructed the model reasonable, then correct values for motions will be automatically computed.
bayram özmen
2017-11-29
ıt ıs perfect. But ı dont know the necessary torque value for desired position. What should I do?
bayram özmen
2017-11-29
well, ı will do like that. but ı do not want to one motor. and ı am applying torque to one motor's spherical joint. But other pieces motion. How can I fix one motor when the others are acting?
bayram özmen
2017-11-29
I mean ı have three motor but ı do not want to move of one motor but ı want to move the other two motor. However ı am appling input one motor and all motors are moving?
Birdman
2017-11-29
If their constraint is satisfied, they may move according to kinematic calculations.
bayram özmen
2017-11-29
Absolutely you are right. Well Can I apply this method that into figure? Firstly ı find the actuation torque for desired angle and the ı can apply may be. I am not sure?
bayram özmen
2017-11-29
I think ıt will work. Also I have a last question. If actuation torque is not a constant, for example ıf ıt is like sinus. How can I apply that torque? I am really very grateful. :)
更多回答(1 个)
bayram özmen
2017-12-3
Hi. I am just dealing with this platform. I know how many angle ıt will move so ı solved the necessity angle for that motion in desired angle by inverse kinematic equation. How can I do this? Which block I apply for desired angle? revolute joint block are there between motor and piece that need to move.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Assembly 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!发生错误
由于页面发生更改,无法完成操作。请重新加载页面以查看其更新后的状态。
您也可以从以下列表中选择网站:
如何获得最佳网站性能
选择中国网站(中文或英文)以获得最佳网站性能。其他 MathWorks 国家/地区网站并未针对您所在位置的访问进行优化。
美洲
- América Latina (Español)
- Canada (English)
- United States (English)
欧洲
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
亚太
- Australia (English)
- India (English)
- New Zealand (English)
- 中国
- 日本Japanese (日本語)
- 한국Korean (한국어)