I cannot get MATLAB to see my beaglebone black

Question

Kurt Stewart 2017-12-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/371732-i-cannot-get-matlab-to-see-my-beaglebone-black

回答： Manish M 2019-6-27

Hello, My beaglebone black is connection is verified using the BBB website, although MATLAB and Embedded Encoder cannot see it. I have installed both support packages. In MATLAB I say bbb=beaglebone and it tells me the following:

 _Cannot establish an SSH connection to the board with device address "192.168.7.2", user name "root", password "". Check if device address, user name and password are correct._

I tried resetting using the 30-30-30 rule: https://www.router-reset.com/default-password-ip-list/BeagleBoardorg#reset-BeagleBoardorg-default-password

The error still occurs. If anyone has help on this that would be great!

Thanks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Manish M 2019-6-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/371732-i-cannot-get-matlab-to-see-my-beaglebone-black#answer_381013

Hi Kurt,

I know this is a late reply but this might be useful for someone else. For MATLAB to detect your Beaglebone you've to install the necessary drivers on the host.

Have you installed the required drivers for Beaglebone Black on your Windows machine? For 64 bit machine: https://beagleboard.org/static/Drivers/Windows/BONE_D64.exe

32 bit machine: https://beagleboard.org/static/Drivers/Windows/BONE_DRV.exe

More instructions are available at: https://beagleboard.org/static/beaglebone/latest/README.htm