matlab ability

Question

mohamed al-asklany 2012-5-14

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/38262-matlab-ability

what is the max freq of signal which can be acquired by sound card to simulink and what is the max voltage level of signal that sound card can deal with it note that simulink time is inf.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2012-5-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/38262-matlab-ability#answer_47701

There is no fixed maximum for frequency or voltage of signal acquisition. Individual signal acquisition boards have restrictions; and your computer might not be able to operate quickly enough to process all of the signals.

4 个评论
显示 2更早的评论隐藏 2更早的评论

Walter Roberson 2012-5-14

You should research the capabilities of your existing data acquisition card.

Note: many data acquisition cards have a relatively limited voltage range of only on the order of 10 volts. Be sure to read the card specifications before connecting a signal!

Beyond that, in order to know what to do, you have to first decide what your goals are. It often helps if you post the goals.

Walter Roberson 2012-5-14

Looking at your past postings, it appears that you might be attempting to do real-time radar work with sound. Tricky but not impossible with the right equipment; sound should be able to get you into the S band of radar, limit on the order of 3 GHz. http://www.physicsforums.com/archive/index.php/t-144509.html

Unfortunately in the time I spent searching, the highest rate data acquisition chip I found was only 1/2 GHz. The devices from National Instruments (well known ADC manufacturer) are at least 40 times slower than that.

http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9434/products/product.html

请先登录，再进行评论。