Power Spectral Density Estimates Using FFT

Question

Mo 2018-3-1

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/385760-power-spectral-density-estimates-using-fft

回答： vijaya lakshmi 2018-3-22

Doc.pdf

I used PSD through FFT and the numbers in my plot (Y-axis) are not less than 1 as I expected to see in PSD result. I attached the sample function and the plot. Is something wrong with my function that should be changed?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

vijaya lakshmi 2018-3-22

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/385760-power-spectral-density-estimates-using-fft#answer_311254

Hi Mo,

To compute the power spectral density using the FFT function, the absolute value FFT output has to be squared and scaled by (1/length(data))*(1/Fs) where Fs is the sampling frequency. This result is then converted to decibels.

I observe that you haven't converted the result in decibels.This might be causing to the numbers along y-axis to be greater than 1.