清空筛选条件
清空筛选条件

Compare segments of a vector

2 次查看（过去 30 天）
Ricardo Gutierrez
编辑： Fangjun Jiang 2018-3-7
Hello good day.
I have a problem, which I hope you can give me support or advice: I have the following column vector of 20 elements (the real one is 1000 elements): A=[6.9563; 6.9563; 6.9563; 6.9563; 6.9563; 7.4917; 5.8343; 5.3075; 5.8713; 7.1312; 11.2175; 11.2175; 11.2175; 11.2175; 11.2175; 10.4278; 10.9766; 11.2685; 9.4748; 11.3789] The question is how to compare (greater than>) the first 5 elements with the second 5 elements of vector A. 6.9563 6.9563 6.9563 6.9563 6.9563 Compare with 7.4917 5.8343 5.3075 5.8713 7.1312 and after third 5 elements with the fourth 5 elements of the vector A 11.2175 11.2175 11.2175 11.2175 11.2175 Compare with 10.4278 10.9766 11.2685 9.4748 11.3789 And so on automatically, if the vector A is 1000 elements
I hope you understand me and help me. Greetings.
  5 个评论
显示 3更早的评论
Jos (10584)
Jos (10584) 2018-3-6
I fail see the relationship between the values of B and the values of A ...
Ricardo Gutierrez
Ricardo Gutierrez 2018-3-7
You're right I put them back A=[2 2 2 2 2 3 6 3 4 5 1 1 1 1 1 2 3 4 5 6]........ 2 2 2 2 2 3 6 3 4 5 in the second 5 values; at least one value is greater than 2 therefore the values pass:3 6 3 4 5.....in the following values 1 1 1 1 1 2 3 4 5 6 the last 5 values at least one value is greater than 1 therefore the values pass:2 3 4 5 6....so it would be in vector B....B=[3 6 3 4 5 2 3 4 5 6 ]

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Fangjun Jiang
Fangjun Jiang 2018-3-7
编辑：Fangjun Jiang 2018-3-7
What if none of the element in second 5 elements is greater than the first 5 elements? The code below might be easier to understand.
A=[2 2 2 2 2 3 6 3 4 5 1 1 1 1 1 0 0 0 0 0];
A=transpose(reshape(A,10,[]));
B=A(:,6:10);
A=A(:,1:5);
C=B>A;
ind=any(C,2);
B(~ind,:)=A(~ind,:)
B =
3 6 3 4 5
1 1 1 1 1

更多回答（3 个）

David Fletcher
David Fletcher 2018-3-6
编辑：David Fletcher 2018-3-6
ind=repmat(logical([0 0 0 0 0 1 1 1 1 1]),1,100)
b=a(ind)
a(ind)=[]
c=a>b
Fangjun Jiang
Fangjun Jiang 2018-3-6
This example should give you an idea
A=transpose(reshape(rand(20,1),5,[]))
B=diff(A)
C=B>0
C should tell you the relation
Jos (10584)
Jos (10584) 2018-3-7
编辑：Jos (10584) 2018-3-7
A = [2 2 2 2 2 3 6 3 4 5 1 1 1 1 1 2 3 4 5 6]
AA = reshape(A,5,[])
dA = diff(AA,[],2)
ix = all(dA>0)
ix = 2*find(ix(1:2:end))
B = reshape(AA(:,ix),1,[])
  2 个评论
Ricardo Gutierrez
Ricardo Gutierrez 2018-3-7
Your code shows as a result:..B = 2 2 2 2 2 1 1 1 1 1...and must be:...B = 3 6 3 4 5 2 3 4 5 6....thank you very much for your work and time
Jos (10584)
Jos (10584) 2018-3-7
Oh, I subtracted a 1 from ix by mistake! Corrected

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Matrix Indexing 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by