GUI interface with arduino

60 次查看(过去 30 天)
now, i try to control arduino board through Matlab GUI(using IO packages). First,i try to light on the LED by click on the push button i create, below is the callback function i put:
a=arduino('com3')
a.pinMode(10,'output');
a.digitalWrite(10,1);
after i try it, the LED only blink for a second, but now i wish to light on the LED continuously, what code should i type? I wish to light on and light off the LED using push button i create...anyone can help me, thanks..
  1 个评论
Mohamed Asif
Mohamed Asif 2017-7-6
https://in.mathworks.com/videos/arduino-and-matlab-reading-inputs-and-writing-outputs-106502.html
use this above link you can get idea about it

请先登录,再进行评论。

采纳的回答

Jarrod Rivituso
Jarrod Rivituso 2011-3-24
Disclaimer - I've used Arduinos in the past, but never used the MATLAB Arduino package.
With that said, I'm not sure if this is your issue, but one thing to consider is whether you want your callback to reinitialize the Arduino pinmode every time.
It seems to me like you'd really want to set up the Arduino pin modes and COM ports in the GUI initialization, and then have your callback only perform the digitalWrite.
If using GUIDE, then you will find a GUI initialization function that you can use to do the initialization. Then, you can use the guidata function to add the Arduino object to the guidata. Something like...
a = arduino('com3');
a.pinMode(10,'output');
handles.a = a;
guidata(hObject, handles);
Then, you could use the handles structure again in your callback
handles.a.digitalWrite(10,ledValue)
Again, this is all assuming you are using GUIDE. If you aren't, then you probably know your GUI's initialization better than I do.
  3 个评论
Jarrod Rivituso
Jarrod Rivituso 2011-3-25
Hi Tee,
Are you placing that code in the OpeningFcn?
You may want to have a read through this documentation page, as it discusses data management within a GUI.
http://www.mathworks.com/help/techdoc/creating_guis/f5-998352.html
Other than that, I can't comment more without seeing your code.
Hope this helps!
-Jarrod
medo
medo 2014-7-28
hi all .... please i need the correct arduinoIO because iam downloading it but it not woke >>> thanx to all

请先登录,再进行评论。

更多回答(2 个)

Kaustubha Govind
Kaustubha Govind 2011-3-24
You could try using a persistent variable to store that last state, and toggle that each time the callback is fired:
persistent ledValue
if isempty(ledValue)
ledValue = 0;
end
ledValue = ~ledValue; %toggle ledValue
a=arduino('com3');
a.pinMode(10,'output');
a.digitalWrite(10,ledValue);
  3 个评论
Kaustubha Govind
Kaustubha Govind 2011-3-24
Apparently digitalWrite doesn't like boolean values - you can make that:
a.digitalWrite(10,double(ledValue));
heisenberg
heisenberg 2015-3-18
how to access serial pins in above program to send data?

请先登录,再进行评论。


hardik sanghvi
hardik sanghvi 2015-11-25
How to make pause and counter button code

类别

Help CenterFile Exchange 中查找有关 MATLAB Support Package for Arduino Hardware 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by