connecting input signal and addition block to single gain block

Question

Ross Hanna 2018-4-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/393445-connecting-input-signal-and-addition-block-to-single-gain-block

编辑： Ross Hanna 2018-4-8

DMSD_Capture_For_Forum.PNG

Hi there

I am trying to place an input signal (the height of a physical bump that a motorcycle is riding over) into a gain block. However, i have also got an addition block i am trying to put into the same gain block, so, two signals into a single input. I have tried using a MUX, but that gives me an error. I have attached a screenshot of my model that i have copied from the mathworks wedbsite. Can anbyone poinbt me in the right direction?

Many Thanks

Ross

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

ugur hasirci 2018-4-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/393445-connecting-input-signal-and-addition-block-to-single-gain-block#answer_314016

You may consider using separate gains for each of them. But still the most important thing is that there sould be an algebraic operation between two signal, which are input signal and addition block.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Ross Hanna 2018-4-8

编辑：Ross Hanna 2018-4-8

Hi there, what exactly do you mean by an algebraic operation between the two signals? I have tried using a gain from the addition block, and a gain for the simin block, however, connecting the two into one to go to the integrator block isn't working, so is there a method I am missing that you could point me in the direction of? Is there a block similar to the MUX that would work?

请先登录，再进行评论。