MATLAB as AXI Master
4 次查看(过去 30 天)
显示 更早的评论
The project with the MATLAB AXI Master jtag IP core assembled, programmed into a chip. When I try to create an object (aximaster object), I see a message - Error using fpgadebug_mex Did not find any Digilent® JTAG cable. Make sure that the cable is connected to your computer. What's the trouble?
0 个评论
采纳的回答
Tao Jia
2018-4-27
Please install the following library:
https://reference.digilentinc.com/lib/exe/fetch.php?tok=6ec654&media=http%3A%2F%2Ffiles.digilent.com%2FSoftware%2FAdept2%2BSystem%2BInstaller%2F2.17.1%2Fdigilent.adept.system_v2.17.1.exe
The Digilent Adept2 library should be automatically installed with Xilinx Vivado. For some reason it didn't work for you, but installing Digilent Adept2 directly should solve the problem.
0 个评论
更多回答(3 个)
Tao Jia
2018-4-20
If you are using KC705, then it should work.
How did you program the FPGA? There is an on-board USB-JTAG port which uses the Digilent JTAG module. This is the one that we support. If you use a Xilinx platform cable to connect to the JTAG header on the board, then it won't work.
Can you double check if the Digilent JTAG cable shows up correctly in the Vivado hardware manager?
Tao Jia
2018-4-24
Can you provide more information on this? What's your operating system? Windows or Linux? What's your MATLAB version? Can you post a screenshot of your Vivado program manager here?
Elijah Dewey
2018-6-8
Hello, I too have this issue using the KC705 board. The error received reads, Found incompatible JTAG IP version. Expected version: 1.1. Found version: 33.8. The version changes every time when using the LaunchDataCaptureApp, sometimes from 0.0 to 200. The programming of the board in Vivado is successful and the mem = aximaster('Xilinx') returns the same error as described above. Any tips to fix this would be great. (Windows 10, Matlab 2018a)
1 个评论
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!