您正在关注此问题

您将在关注的内容源中看到更新。
您可能会收到电子邮件，具体取决于您的通信预设项。

How to resolve this error message in interpolate1?

2 次查看（过去 30 天）

显示更早的评论

Ismail Qeshta 2018-5-27

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1

⋮

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1

评论： Ismail Qeshta 2018-5-27

xx11.0.txt
yy11.0.txt

在 MATLAB Online 中打开

Hi, I am using the following code for interpolation:

clear; clc;
y=load ('xx11.0.txt');
x=load ('yy11.0.txt');
plot(x(:,2),-sum(y(:,2:11),2))
xlabel('X')
ylabel('Y')
y1=-sum(y(:,2:11),2);
x1=x(:,2);
y3=unique(y1);
x3=unique(x1);
y2 = [9080.954]*1000;
x2 = interp1(y3, x3, y2, 'linear');
figure(1)
plot(x1, y1, '-g')
hold on
plot(x2, y2, 'bp')
hold off
grid
legend('Data', 'Interpolated Points', 'Location', 'NW')

But I keep getting the following error message:

Error using interp1>reshapeAndSortXandV (line 423)
X and V must be of the same length.
Error in interp1 (line 92)
    [X,V,orig_size_v] = reshapeAndSortXandV(varargin{1},varargin{2});
Error in Interpolate (line 15)
x2 = interp1(y3, x3, y2, 'linear');

11 个评论
显示 9更早的评论隐藏 9更早的评论

Paolo 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572467

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572467

Ismail,

The error is telling you that the dimensions of y3 and x3 are different. I ran the code and found that y3 is 5503x1, whereas x3 is 5501x1.

Ismail Qeshta 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572471

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572471

Hi Paolo,

Many thanks for your reply. That is actually strange. I am not sure why the dimensions are different. I have plotted them manually, and could not find that mismatch in dimensions.

Paolo 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572474

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572474

编辑：Paolo 2018-5-27

在 MATLAB Online 中打开

For testing purposes I removed the last two points from y3 as follows:

y3= y3(1:end-2);

The code ran successfully. The graphical output:

Ismail Qeshta 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572476

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572476

Thank you very much Paolo for your help. It works now.

dpb 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572478

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572478

在 MATLAB Online 中打开

Because you used

y3=unique(y1);
x3=unique(x1);

to get the x,y values for the interpolant and it turns out there are different numbers that are unique for the two.

...
x2 = interp1(y3, x3, y2, 'linear');

By doing that independently, you also may have rearranged the x,y relationship somewhat in the area(s) in which there are duplicated values.

You might want to use the 'rows' option to make both x and y disappear where they aren't unique combinations.

dpb 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572502

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572502

"Working" doesn't necessarily imply "correct"; whether you got the right answer or not depends on where the UNIQUE() values were and what happened to the x,y relationship from that point forward.

Simply removing the two "extra" points from the longer vector may make no difference for the specific point, may make only an insignificant difference, or could have a profound effect on the result; all depends on just what the data are and how the values were rearranged owing to the independent removal.

Paolo 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572508

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572508

@dpb that's correct, I did state that I just removed the two points for testing purposes only. I just pointed out the nature of the error, Ismail will have to determine why the data he is using right results in incorrect values when using unique().

dpb 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572512

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572512

Ismail (the OP) indicated it "was working"; response is to that comment.

As for the cause, I outlined the "why" of the differing lengths above as well as the manner in which it could be corrected.

Ismail Qeshta 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572516

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572516

Thank you very much bpb and Paolo for your explanation. I have tried the idea of Paolo and it gave me reasonable estimate, which is sufficient at this stage of my problem.

dpb 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572526

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572526

Very risky move... :)

Ismail Qeshta 2018-5-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572527

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/402788-how-to-resolve-this-error-message-in-interpolate1#comment_572527

Thanks dpb for your feedback. I am actually aware of it. I just need a rough estimate of the data at this stage. I shall get back to you when I need to be more accurate. Thank you very much again for your great help.

请先登录，再进行评论。

请先登录，再回答此问题。