清空筛选条件
清空筛选条件

Problem reading Modbus/TCP with Instrument Control Toolbox

5 次查看（过去 30 天）
Jose
Jose 2018-6-15
编辑： Jose 2018-6-15
I am trying to read a Victron Energy photovoltaic system from Modbus/TCP (see the mapping example here) by means of the Instrument Control Toolbox. First, I created the object by means of this command:
>>m = modbus('tcpip', '192.168.XXX.50', 502)
and it seems to respond correctly because the answer is:
m =
Modbus TCPIP with properties:
DeviceAddress: '192.168.XXX.50'
Port: 502
Status: 'open'
NumRetries: 1
Timeout: 10 (seconds)
ByteOrder: 'big-endian'
WordOrder: 'big-endian'
Then, I try to read a register through the command read(m,target,address,count, serverId):
>> read(m,'holdingregs',3,1,246)
And I found the following error:
The Modbus server returned an invalid address error. Address + count is out of range.
How can I solve this problem?

请先登录，再回答此问题。

回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Modbus Communication 的更多信息

标签

产品


版本

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by