Resetting FFT (HDL Optimized) in Simulink

1 次查看(过去 30 天)
I am using the HDL optimized FFT block in Simulink as the core of a frequency estimation system to be implemented on an FPGA. I am receiving bursts of BPSK modulated data, and so need to determine the frequency offset of each burst. What I want to do is reset the internal state of the FFT after each burst (which I detect with a separate energy detection block) - which I've tried with both a resettable subsystem and the actual reset port on the FFT block - but neither successfully reset the FFT. Either the FFT will not update and continue to output the first frequency locked, or will reset to 0 and once again not update.
However, I know that the FFT itself (and the rest of the system) is working, as when I start the simulation before a burst, it properly determines the frequency.

回答(1 个)

Alireza
Alireza 2018-8-13
You probably reset the core too early before the whole frame is out. Use the ENDOUT output signal of the FFT to time the reset.

产品


版本

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by