How to include the effect of lead screw efficiency in a Simscape Multibody lead screw block

Question

Daniel Stuewe 2018-8-10

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/414419-how-to-include-the-effect-of-lead-screw-efficiency-in-a-simscape-multibody-lead-screw-block

评论： Daniel Stuewe 2018-8-23

I need to include the efficiency of the lead screw (actually a ball screw) in the mechanism I'm simulating. I put together what I consider a "hack" to include a translating friction that is a function of the input torque, but this seems inelegant and probably inefficient. What are some ways to include this basic parameter of lead screws into a model?

(This question leads to the more global question of whether or not Mathworks will add friction or efficiency to any of the joints in Multibody so that band-aids using Simulink or Simscape Foundation Library aren't necessary.)

Dan

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Andrew 2018-8-21

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/414419-how-to-include-the-effect-of-lead-screw-efficiency-in-a-simscape-multibody-lead-screw-block#answer_333594

编辑：Andrew 2018-8-21

Hey, what I did to make this work was by creating my own joint of sorts. Basically the lead screw has 2 degrees of freedom here, a translational and a revolute, so i just used each of those joints individually and then controlled the positions of them based on a 1D model based on simulink driveline ratchet leadscrew (https://www.mathworks.com/help/physmod/sdl/examples/ratchet-leadscrew-mechanism.html)

Inside the Friction Model subsystem: