detect certain shapes in binary
4 次查看(过去 30 天)
显示 更早的评论
hi,in my image has 2 shapes ;triangular and circular(in binary). how can I eliminate the circular shape so that it just detect triangular shape.many thanks!
0 个评论
采纳的回答
Walter Roberson
2012-7-3
Use regionprops() to calculate the Eccentricity. Eccentricity should be nearly 0 for a circle.
16 个评论
Walter Roberson
2012-7-6
Look for the line that says
% Now I'll demonstrate how to select certain blobs based using the ismember function.
更多回答(2 个)
Image Analyst
2012-7-3
编辑:Image Analyst
2012-7-9
I prefer the perimeter squared to area ratio - the "circularity". For things like an asterisk shape, the eccentricity would be similar to similar to a circle bit the "circularity" of an asterisk would be much higher than that of a circle.
circularity = perimeter^2 / (4 * pi * area);
This is a very commonly used metric in shape analysis. So common that I don't know why it's not built into regionprops(). See my shape recognition demo:
% Demo to find certain shapes in an image based on their shape.
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
imtool close all; % Close all imtool figures.
clear; % Erase all existing variables.
workspace; % Make sure the workspace panel is showing.
fontSize = 20;
% Read in a standard MATLAB gray scale demo image.
folder = fullfile(matlabroot, '\toolbox\images\imdemos');
baseFileName = 'pillsetc.png';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
% Check if file exists.
if ~exist(fullFileName, 'file')
% File doesn't exist -- didn't find it there. Check the search path for it.
fullFileName = baseFileName; % No path this time.
if ~exist(fullFileName, 'file')
% Still didn't find it. Alert user.
errorMessage = sprintf('Error: %s does not exist in the search path folders.', fullFileName);
uiwait(warndlg(errorMessage));
return;
end
end
% Read in image into an array.
rgbImage = imread(fullFileName);
[rows, columns, numberOfColorBands] = size(rgbImage);
% Display it.
subplot(2, 2, 1);
imshow(rgbImage, []);
title('Input Image', 'FontSize', fontSize);
% Enlarge figure to full screen.
set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
% Give a name to the title bar.
set(gcf,'name','Shape Recognition Demo','numbertitle','off')
% If it's monochrome (indexed), convert it to color.
if numberOfColorBands > 1
grayImage = rgbImage(:,:,2);
else
% It's already a gray scale image.
grayImage = rgbImage;
end
% Make a triangle on it.
triangleXCoordinates = [360 420 480];
triangleYCoordinates = [350 252 350];
traiangleBinaryImage = poly2mask(triangleXCoordinates, triangleYCoordinates, rows, columns);
% Burn it into the gray scale image.
grayImage(traiangleBinaryImage) = 255;
% Display it.
subplot(2, 2, 2);
imshow(grayImage, []);
title('Grayscale Image', 'FontSize', fontSize);
% Binarize the image.
binaryImage = grayImage > 120;
% Display it.
subplot(2, 2, 3);
imshow(binaryImage, []);
title('Initial (Noisy) Binary Image', 'FontSize', fontSize);
% Remove small objects.
binaryImage = bwareaopen(binaryImage, 300);
% Display it.
subplot(2, 2, 4);
imshow(binaryImage, []);
title('Cleaned Binary Image', 'FontSize', fontSize);
[labeledImage numberOfObjects] = bwlabel(binaryImage);
blobMeasurements = regionprops(labeledImage,...
'Perimeter', 'Area', 'FilledArea', 'Solidity', 'Centroid');
% Get the outermost boundaries of the objects, just for fun.
filledImage = imfill(binaryImage, 'holes');
boundaries = bwboundaries(filledImage);
% Collect some of the measurements into individual arrays.
perimeters = [blobMeasurements.Perimeter];
areas = [blobMeasurements.Area];
filledAreas = [blobMeasurements.FilledArea];
solidities = [blobMeasurements.Solidity];
% Calculate circularities:
circularities = perimeters .^2 ./ (4 * pi * filledAreas);
% Print to command window.
fprintf('#, Perimeter, Area, Filled Area, Solidity, Circularity\n');
for blobNumber = 1 : numberOfObjects
fprintf('%d, %9.3f, %11.3f, %11.3f, %8.3f, %11.3f\n', ...
blobNumber, perimeters(blobNumber), areas(blobNumber), ...
filledAreas(blobNumber), solidities(blobNumber), circularities(blobNumber));
end
% Say what shape they are.
% IMPORTANT NOTE: depending on the aspect ratio of the rectangle or triangle
% their circularity can go from some minimum number up to a huge number.
for blobNumber = 1 : numberOfObjects
% Outline the object so the user can see it.
thisBoundary = boundaries{blobNumber};
subplot(2, 2, 2); % Switch to upper right image.
hold on;
% Display prior boundaries in blue
for k = 1 : blobNumber-1
thisBoundary = boundaries{k};
plot(thisBoundary(:,2), thisBoundary(:,1), 'b', 'LineWidth', 3);
end
% Display this bounary in red.
thisBoundary = boundaries{blobNumber};
plot(thisBoundary(:,2), thisBoundary(:,1), 'r', 'LineWidth', 3);
subplot(2, 2, 4); % Switch to lower right image.
% Determine the shape.
if circularities(blobNumber) < 1.2
message = sprintf('The circularity of object #%d is %.3f,\nso the object is a circle',...
blobNumber, circularities(blobNumber));
shape = 'circle';
elseif circularities(blobNumber) < 1.6
message = sprintf('The circularity of object #%d is %.3f,\nso the object is a square',...
blobNumber, circularities(blobNumber));
shape = 'square';
elseif circularities(blobNumber) > 1.6 && circularities(blobNumber) < 1.8
message = sprintf('The circularity of object #%d is %.3f,\nso the object is an isocoles triangle',...
blobNumber, circularities(blobNumber));
shape = 'triangle';
else
message = sprintf('The circularity of object #%d is %.3f,\nso the object is something else.',...
blobNumber, circularities(blobNumber));
shape = 'something else';
end
% Display in overlay above the object
overlayMessage = sprintf('Object #%d = %s\ncirc = %.2f, s = %.2f', ...
blobNumber, shape, circularities(blobNumber), solidities(blobNumber));
text(blobMeasurements(blobNumber).Centroid(1), blobMeasurements(blobNumber).Centroid(2), ...
overlayMessage, 'Color', 'r');
button = questdlg(message, 'Continue', 'Continue', 'Cancel', 'Continue');
if strcmp(button, 'Cancel')
break;
end
end
11 个评论
Laveena Kewlani
2016-8-3
Image Analyst, Is there any way to know the circularity of other important shape, hexagon, star etc?
murk hassan memon
2018-4-11
Hi Image Analyst, Currently i am working on microscopic blood images in order to detect infected parasites of malaria and for this implementation first i need much data set . i have gone through two different image resources (ASH,CDC) but did not find much data set there. so its my request to you that i you have data set of microscopic blood images(normal,abnormal)then kindly help me out or suggest me another image resources to get from there. waiting for your response
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Elementary Polygons 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!