Change colour order and restore it
237 次查看(过去 30 天)
显示 更早的评论
Hi,
I want to change figure colour order. I use this
co = [0 0.4470 0.7410;
0.85 0.3250 0.098;
0.9290 0.6940 0.1250;
0.4940 0.1840 0.5560;
0.4660 0.6740 0.1880;
0.6350 0.0780 0.1840;
0.3010 0.7450 0.9330];
set(gca,'defaultAxesColorOrder',co)
get(gca,'colororder')
I only change the last row becuase I want this colour before. However, it does not work, I get this
ans =
0 0.4470 0.7410
0.8500 0.3250 0.0980
0.9290 0.6940 0.1250
0.4940 0.1840 0.5560
0.4660 0.6740 0.1880
0.3010 0.7450 0.9330
0.6350 0.0780 0.1840
If I use this
co = [0 1 1;
0 0.5 0;
1 0 0;
0 0.75 0.75;
0.75 0 0.75;
0.75 0.75 0;
0.25 0.25 0.25];
Everything works fine... So, what is wrong?
On the other hand, after change the order (if I could), I want to restore it and I use this:
ax = gca; ax.ColorOrderIndex = 1;
But I could no restore it... I plot a figure and I get the same result that previously...
Any help?
Best regards
4 个评论
回答(3 个)
Stephen23
2019-2-15
编辑:Stephen23
2019-2-18
"I want to change figure colour order"
Figures do not have a ColorOrder property, only axes do.
It is easy to change the axes' ColorOrder, but note that "high-level" graphics operations (e.g. plot, surf, line, etc) completely reset the axes back to their default settings in preparation for displaying the new data. And the ColorOrder is not applied to already existing objects (i.e. you have to set the ColorOrder and then plot). This means there are basically two ways to set the ColorOrder:
- set the graphics root's default value to the colormap you want, or
- set an axes' value to the colormap you want AND also change its NextPlot value to 'replacechildren' or 'add'.
and then plot your new data.
Here is an example of the second option:
>> X = 0:0.1:2*pi;
>> Y = bsxfun(@plus,sin(X),(1:7).');
>> plot(X,Y,'LineWidth',3)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/204628/image.png)
>> map = get(gca,'ColorOrder')
map =
0 0.4470 0.7410
0.8500 0.3250 0.0980
0.9290 0.6940 0.1250
0.4940 0.1840 0.5560
0.4660 0.6740 0.1880
0.3010 0.7450 0.9330
0.6350 0.0780 0.1840
>> map([end-1,end],:) = map([end,end-1],:); % swap last two rows.
>> set(gca, 'ColorOrder',map, 'NextPlot','ReplaceChildren')
>> plot(X,Y,'LineWidth',3)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/204629/image.png)
Looking at the first two lines it is clear that they have swapped color. And checking:
>> get(gca,'ColorOrder')
ans =
0 0.4470 0.7410
0.8500 0.3250 0.0980
0.9290 0.6940 0.1250
0.4940 0.1840 0.5560
0.4660 0.6740 0.1880
0.6350 0.0780 0.1840
0.3010 0.7450 0.9330
Afterwards you can reset the ColorOrder using:
set(gca,'ColorOrder','factory')
0 个评论
Asieh Daneshi
2019-2-16
write the following codes before plotting your resluts:
co = [0 0.4470 0.7410;
0.85 0.3250 0.098;
0.9290 0.6940 0.1250;
0.4940 0.1840 0.5560;
0.4660 0.6740 0.1880;
0.6350 0.0780 0.1840;
0.3010 0.7450 0.9330];
fig=figure;
set(fig,'defaultAxesColorOrder',co)
it worked for me. just adhere to the order of the codes.
Image Analyst
2019-2-16
You can save the default color order in advance if you want to change it and restore it. See my attached demo (which sets it but does not restore it though that is trivial)
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Annotations 的更多信息
产品
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!