Simscape Generic Engine Not Working
6 次查看(过去 30 天)
显示 更早的评论
Hi,
There is an issue in my model. I am trying to use the generic engine to power my vehicle system but it always ended up giving me zero torque regardless the changes I did in the parameters. I followed the simscape tutorial ,Student Competition: Physical Modeling Training. I still cannot make the engine work.
Attached hereby my files. And hopefully will hear from you soon.
Best regards
Wei Kang
2 个评论
Tatyana Serditova
2019-4-14
I have the similar problem!! I already specify initial veocity and engine inertia, but all output ports provide zero signal. How can I download your simulink model ("EngineProblem.slx")?
Adhip Shukla
2019-10-13
Hi Tatyana
I am also facing the same problrm. Did you get the solution to your above problem ? please help me out if you get its solution.
采纳的回答
Veer Alakshendra
2019-3-13
编辑:Veer Alakshendra
2019-3-13
Hi Wei,
Thanks for reaching out and sharing the models with us.
We just checked your model. While using 'Generic Engine Block', it's important to define the 'Engine inertia' and 'Initial velocity' as these parameters account for the dynamics of the engine. Please specify these values, and you will get the required torque.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/208175/image.png)
6 个评论
Adhip Shukla
2019-10-17
Thanks for replying Sir,
I have changed all the block parameters according to the vehicle Ford Ikon. I have used a 5 speed transmission here. In vehicle body block I have changed the parameters which I know and let all other at default values. For any more detail kindly go through my model. I have used the ideal torque source and I am getting results in that but with generic engine problem is coming.
Veer Alakshendra
2019-10-31
编辑:Veer Alakshendra
2019-10-31
Hello Adhip,
As you said, with the torque source your model works fine. It means the drivline and the vehicle dynamics is correct. Further, when you add the engine it doesn't work. Please note that when you add the engine you need to do a bit of tuning of engine parameters, throttle input, and gear ratio to ensure that the angular velocity doesn't exceed the maximum speed. In tried my hand and here are the tuned values of some of the parameters:
- Throttle value initial input=0.05
- Simple gear ratio=5
Once you input these values, you can see the results are perfect. I have attached the modified model.
Let me know if this is helpful.
Thanks,
Veer
更多回答(1 个)
Ziad Elsheikh
2020-12-19
hi,
i have the same issue with generic engine. also i defined most of the parameter ( leaving the unkown ones default) and just simply connecting it to a ideal torque source to load the engine. however, The output power is always "Zero".
thank in advance if any could help me
0 个评论
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!