Fitting Monod Equation with ODE45 to data using lsqcurvefit function
27 次查看(过去 30 天)
显示 更早的评论
Hello!
I am fitting Monod equation to a data containing substrate (s), biomass (x), and ethanol (p) concentration against time. The objective is to get the parameters: 1) umax, 2) ks, 3) Yxs, and 4)Yps that will best represent the data. The differential equations are:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/215228/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/215229/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/215230/image.png)
Here is my initial code using assumed values of the four parameters:
umax = 0.5;
ks = 6.5;
Yxs = 0.2;
Yps = 1.2;
%a(1) = x
%a(2) = s
%a(3) = p
f = @(t,a) [umax*a(1)*a(2)/(ks + a(2)); -(1/Yxs)*umax*a(1)*a(2)/(ks + a(2)); (1/Yps)*umax*a(1)*a(2)/(ks + a(2))];
xt0 = [0.0904,9.0115,0.0151];
[tspan,a] = ode45(f,[0 25],xt0);
figure
plot(tspan,a(:,1),tspan,a(:,2),tspan,a(:,3))
Here is the code for trying to fit it into the actual data (script file):
function pos = paramfun1(x,tspan)
umax = x(1);
ks = x(2);
Yxs = x(3);
Yps = x(4);
xt0 = x(5:7);
f = @(t,a) [umax*a(1)*a(2)/(ks + a(2)); -(1/Yxs)*umax*a(1)*a(2)/(ks + a(2)); (1/Yps)*umax*a(1)*a(2)/(ks + a(2))];
[~,pos] = ode45(f,tspan,xt0);
Here is my call function (in the command window):
xt0 = zeros(1,7);
xt0(1) = umax;
xt0(2) = ks;
xt0(3) = Yxs;
xt0(4) = Yps;
data =[0 3 5 8 9.5 11.5 14 16 18 20 25 27, 0.0904 0.1503 0.2407 0.3864 0.5201 0.6667 0.8159 0.9979 1.0673 1.1224 1.1512 1.2093; 0 3 5 8 9.5 11.5 14 16 18 20 25 27, 9.0115 8.8088 7.9229 7.2668 5.3347 4.911 3.5354 1.4041 0 0 0 0; 0 3 5 8 9.5 11.5 14 16 18 20 25 27, 0.0151 0.0328 0.0621 0.1259 0.2949 0.3715 0.4199 0.522 0.5345 0.6081 0.07662 0.7869];
%time =[0 3 5 8 9.5 11.5 14 16 18 20 25 27];
[pbest,exitflag,output] = lsqcurvefit(@paramfun,xt0,tspan,data);
fprintf('New parameters: %f, %f, %f, %f',pbest(1:4));
The error is function value not equal to YDATA. Btw, this code was based from an example in MATLAB. (https://www.mathworks.com/help/optim/ug/fit-differential-equation-ode.html)
My data is:
time = [0 3 5 8 9.5 11.5 14 16 18 20 25 27]
x = 0.0904 0.1503 0.2407 0.3864 0.5201 0.6667 0.8159 0.9979 1.0673 1.1224 1.1512 1.2093
s = 9.0115 8.8088 7.9229 7.2668 5.3347 4.911 3.5354 1.4041 0 0 0 0
p = 0.0151 0.0328 0.0621 0.1259 0.2949 0.3715 0.4199 0.522 0.5345 0.6081 0.07662 0.7869
Please help! I do not know how to input my data into the lsqcurvefit function.
Thanks in advance!
采纳的回答
David Wilson
2019-4-22
编辑:David Wilson
2019-4-22
Here's my solution.
First set up the measured data, plot it, and look to see that it is all OK.
t = [0 3 5 8 9.5 11.5 14 16 18 20 25 27]'
x = [0.0904 0.1503 0.2407 0.3864 0.5201 0.6667 0.8159 0.9979 1.0673 1.1224 1.1512 1.2093]';
s = [9.0115 8.8088 7.9229 7.2668 5.3347 4.911 3.5354 1.4041 0 0 0 0]';
p = [0.0151 0.0328 0.0621 0.1259 0.2949 0.3715 0.4199 0.522 0.5345 0.6081 0.07662 0.7869]';
plot(t,[x,s,p],'o-')
No problems there. Note that the measured data is in columns.
Now, we need a function to export the predicted measurements as a function of the unknown parameters and initial conditions. My function is:
function ypred = paramfun1(p,t)
umax = p(1); ks = p(2); Yxs = p(3); Yps = p(4); % use disperse here ...
xt0 = p(5:7); % initial conditions
f = @(t,a) [umax*a(1)*a(2)/(ks + a(2)); ...
-(1/Yxs)*umax*a(1)*a(2)/(ks + a(2)); ...
(1/Yps)*umax*a(1)*a(2)/(ks + a(2))];
[~,ypred] = ode45(f,t,xt0);
end
May I suggest that you think about naming your functions sensible names. Also it is more elegant to use disperse (from the user's group) here.
Now we are ready to test it, and make sure our output is the same shape as the actual data.
xt0 = [0.1;9;0.1]; % read off from data plot [x0 ,S0, p0]';
p0 = [umax; ks; Yxs; Yps; xt0]
Ypred = paramfun1(p0,t); % measurement predictions
Now we are ready for the fit. I'm using your initial conditions, and we can get reasonable start values from the data.
pfit = lsqcurvefit(@paramfun1,p0,t,[x,s,p])
Now plot the fitted curve and the actual data. They should line up.
umax = pfit(1); ks = pfit(2);Yxs = pfit(3); Yps = pfit(4);
f = @(t,a) [umax*a(1)*a(2)/(ks + a(2)); -(1/Yxs)*umax*a(1)*a(2)/(ks + a(2)); (1/Yps)*umax*a(1)*a(2)/(ks + a(2))];
xt0 = pfit(5:7);
[tspan,a] = ode45(f,[0 25],xt0);
plot(tspan,a(:,1),tspan,a(:,2),tspan,a(:,3), '-', ...
t,x,'o',t,s,'+',t,p,'s')
Plot shows the regressed fit is not too bad:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/215247/image.png)
7 个评论
Vinoj Liyanaarachchi
2019-10-19
Are there any techniques to improve the parameter estimation? Above shapes of the curves are not acceptable in my case (microalgae cultivation).
Thanks in advance!
Antara Mazumder
2020-6-6
Hi this was really helpful, but I dont know I worte exactlr same code, but it showing me an error for using options saying " Empty keys are not allowed in this container.", dint understand this.
更多回答(2 个)
Alex Sha
2019-10-21
The follow results obtained from 1stOpt may be used for comparison:
Code:
Variable t,x,s,p;
ODEFunction x'=umax*s*x/(ks + s);
s'=-(1/Yxs)*umax*s*x/(ks + s);
p'=(1/Yps)*umax*s*x/(ks + s);
Data;
t = [0 2 4 6 8 10 12 14 16];
x = [0.06 0.11 0.46 0.78 1.42 2.36 2.49 2.49 2.54];
s = [9.54 9.33 9.52 9.06 8.05 7.27 6.03 5.80 5.51];
p = [0.00 0.00 0.00 0.01 0.18 0.35 0.49 0.53 0.55];
Results:
Root of Mean Square Error (RMSE): 0.250520910244571
Sum of Squared Residual: 1.50625743527444
Correlation Coef. (R): 0.981509121545543
R-Square: 0.963360155677103
Adjusted R-Square: 0.914727231437843
Determination Coef. (DC): 0.942399473562309
F-Statistic: 14.7361249635671
Parameter Best Estimate
-------------------- -------------
umax 0.117013263727751
ks -5.83263810513223
yxs 0.699511367324087
yps 5.01252941213249
![c215.jpg](https://www.mathworks.com/matlabcentral/answers/uploaded_files/243724/c215.jpeg)
![c216.jpg](https://www.mathworks.com/matlabcentral/answers/uploaded_files/243725/c216.jpeg)
![c217.jpg](https://www.mathworks.com/matlabcentral/answers/uploaded_files/243726/c217.jpeg)
2 个评论
Vinoj Liyanaarachchi
2019-10-21
Rifat Hasan
2022-11-2
Hi ! I have tried to run the code by David welson. I am getting an error.
Solver stopped prematurely.
lsqcurvefit stopped because it exceeded the function evaluation limit,
options.MaxFunctionEvaluations = 7.000000e+02.
How can I solve this issue?
Alex Sha
2019-10-21
Hi, Vinoj Liyanaarachchi, the code have been provided above alreadly, but note, that code is not for Matlab, but for another package called 1stOpt. In Matlab, no matter lsqcurvefit or fminsearch functions, are all to adopt local optimization algorithms, it is why those functions depended haveily on initial start-values. Global optimization toolbox in Matlab (like GA) is not good enough to ensure the global solution.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Interpolation 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!