How PI control tuned using the error information ?

Question

Birhan Gezahegn 2019-5-13

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/461778-how-pi-control-tuned-using-the-error-information

编辑： Birhan Gezahegn 2019-5-14

How PI control tunned using the error information

error = refefrence-measure

PI = kp+ki/s

vb =( refefrence-measure ) *(kp+ki/s);

I can access the error excil data, so i need to determone the PI gain. Any information please. thanks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Raj 2019-5-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/461778-how-pi-control-tuned-using-the-error-information#answer_374854

I'll assume you have a set of time domain (rise time, settling time, overshoot etc) or frequency domain (gain margin, phase margin etc) criteria that should be met by your closed loop system. Now you have multiple options to estimate and tune your PI gains.

1) Use root locus technique to see the movement of system Poles-Zeros in the S-Domain and pick the gain which meets your desired criteria.

2) Use MATLAB pidTuner. Its a very user friendly tool to tune your controller. Just type 'pidTuner' in your command prompt. Contrary to the name, you have option to choose type of controller (P,PI,PID etc).

Hope this helps. Get back in case you are having any difficulty.

3 个评论
显示 1更早的评论隐藏 1更早的评论

Raj 2019-5-14

Ok, so i understand that you dont have the system's transfer function and you are just using it as a black box. In that case i suggest you generate a set of input-output data and use the pidTuner to identify the system first. Then you can proceed with design and tuning of controller.

Birhan Gezahegn 2019-5-14

编辑：Birhan Gezahegn 2019-5-14

It is clear up to here, I have input data from the output of the PI and and output data from the negative feeedback loop. But, what is procedure to collect these INPUT/OUTPUT data for two or more parrallel PI control ( not cascaded or double loop)? They have influnce each other? Is threre any guiding rules?

请先登录，再进行评论。