Converting Simscape DC Voltage Source to Simulink

41 次查看（过去 30 天）
Mitchell Hagar
Mitchell Hagar 2019-5-28
回答： Arvind Sathyanarayanan 2019-6-4
My team and I are researching different tools to use for modeling and simulation. I am working on a small model to showcase what Mathworks has to offer. I've ran into a problem with trying to convert the DC Voltage Source from Simscape into Simulink using the PS-Simulink Converter. After some quick research the converter should be the answer I'm looking for, but it is not letting me connect the source to the converter. Any ideas on how to fix this problem?

请先登录，再回答此问题。

采纳的回答

Arvind Sathyanarayanan
Mitchell, thanks for the screenshot.
If I understand you correctly, you're trying to use Simscape foundation library. The best way to "convert" simscape to simulink is to measure the voltage/current source using the appropriate sensor, followed by a PS to Simulink converter and then sending this signal to your stateflow chart.
Please see the attached model.

更多回答（2 个）

Arvind Sathyanarayanan
Mitchell,
Can you attach the model or post a screenshot so we can see the blocks you're trying to connect?
If you're using the DC votlage source from the specialized technology library and trying to interface it with the Simscape electrical blocks you'll need Current-Voltage Simscape Interface. There are some examples available here.
  2 个评论
Mitchell Hagar
Mitchell Hagar 2019-5-29
In Simscape I have the following libraries - Simscape/Foundation Library/Electrical. In the electrical folder I have Electrical Elements, Electrical Sensors, and Electrical Sources. What Mathworks subscripition do I need to use the Specialized Power Systems library?
Arvind Sathyanarayanan
Arvind Sathyanarayanan 2019-5-30
It is a part of the Simscape Electrical toolbox.
Could please show what block(s) you're trying to connect to your DC voltage source?

请先登录，再进行评论。

Mitchell Hagar
Mitchell Hagar 2019-6-4
So I have Simscape which by default gives me the basic tools in the electrical Simscape tool box. I don't have the full version of the electrical Simscape. I'm trying to put a DC voltage source in place of the constants on the far left of the diagram below. Also I will want to add in current sources, so if you have any tips on how to do that, that would be great.
Moedl 1.PNG

类别

在 Help Center 和 File Exchange 中查找有关 Electrical Sensors 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by