Ardunio not detected by Analog input recorder

Question

Nicolas Bourbaki 2019-8-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/476411-ardunio-not-detected-by-analog-input-recorder

评论： Mohammad reza Nejati 2021-2-18

The analog input recorder works very good for me and it detects different data acquisition devices like National Instrument boards and the ADALM1000.

I can connect to my Arduino Uno in MATLAB (and also with the Arduino IDE, of course), but the analog input recorder doesn't recognize the Arduino.

Is this a more general issue? Do I need to configure the Arduino in a special way?

I should mention, that interfacing with the Arduino(s) (Uno, Nano etc.) with code, i.e. MATLAB's arduino function works perfectly well and I am able to record input or generate output.

What additional diagnostics could I run in order to pin down the problem?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Mohammad reza Nejati 2021-2-18

I have the same problem. Does anyone have any solution?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Nikhil Sonavane 2019-8-21

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/476411-ardunio-not-detected-by-analog-input-recorder#answer_388469

Check if your device is supported by the Data Acquisition Toolbox of MATLAB. You may refer to the following documentation for more details-

https://www.mathworks.com/help/daq/install-hardware-support-package-for-vendor-support.html

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Nicolas Bourbaki 2019-8-27

Thanks a lot for your answer. I should have mentioned that interfacing with the Arduino(s) (Uno, Nano etc.) by code (i.e. the MATLAB's arduino function) works absolutely fine and I can nicely recorder input or generate output.

I did install the Arduino Hardware Support Package, but the Analog Input Recorder would not even list one of the Arduinos.

请先登录，再进行评论。