Converting FORTRAN code for Finite Element Analysis - Dealing with a Go To Command
13 次查看(过去 30 天)
显示 更早的评论
Hello everyone,
I'm working on a problem and trying to come to grips with finite element analysis. I'm working from "A Simple Introduction to Finite Element Electromagnetic Problems", MATTHEW N. 0. SADIKU, IEEE TRANSACTIONS ON EDUCATION, VOL. 32, NO. 2, MAY 198. In it some sample FORTRAN code is provided for one of the example problems. My attempt is then to translate this program into MATLAB however I'm struggling to deal with the Go To statements.
The FORTRAN program is:
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/239277/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/239278/image.png)
EDIT: Updated Attempt At Code:
%Nodes:
N(1,:) = [0,0];N(2,:) = [0.2,0];N(3,:) = [0.4,0];N(4,:) = [0.6,0];N(5,:) = [0.8,0];N(6,:) = [1.0,0];
N(7,:) = [0,0.2];N(8,:) = [0.2,0.2];N(9,:) = [0.4,0.2];N(10,:) = [0.6,0.2];N(11,:) = [0.8,0.2];
N(12,:) = [0,0.4];N(13,:) = [0.2,0.4];N(14,:) = [0.4,0.4];N(15,:) = [0.6,0.4];N(16,:) = [0,0.6];
N(17,:) = [0.2,0.6];N(18,:) = [0.4,0.6];N(19,:) = [0,0.8];N(20,:) = [0.2,0.8];N(21,:) = [0,1];
X = N(:,1); Y = N(:,2);
%Triangles:
TRI = [1,2,7;2,8,7;2,3,8;3,9,8;3,4,9;4,10,9;4,5,10;5,11,10;5,6,11;7,8,12;...
8,13,12;8,9,13;9,14,13;9,10,14;10,15,14;10,11,15;12,13,16;13,17,16;...
13,14,17;14,18,17;14,15,18;16,17,19;17,20,19;17,18,20;19,20,21];
%Fixed (perscribed) Potentials [Vf,Node Number]
Vp = [0,1;0,2;0,3;0,4;0,5;50,6;100,11;100,15;100,18;100,20;50,21;0,19;0,16;0,12;0,7];
ND = size(N,1); %Number of Nodes
NE = size(TRI,1); %Number of Elements
NP = size(Vp,1); %Number of Fixed Nodes
NF = ND-NP; %Number of Free Nodes
%Preallocations:
Cg = zeros(ND,ND);
B = zeros(ND,1); %-[Cfp][Vf] rearranged into a matrix with 1's at p nodes
for I = 1:NE %Over Each Element {I}
nodes = TRI(I,:);
Xe = X(nodes); Ye = Y(nodes);
%Local Coefficient Matrix:
P(1) = Ye(2) - Ye(3); Q(1) = Xe(3) - Xe(2);
P(2) = Ye(3) - Ye(1); Q(2) = Xe(1) - Xe(3);
P(3) = Ye(1) - Ye(2); Q(3) = Xe(2) - Xe(1);
A{I} = 0.5.*(P(2)*Q(3) - P(3)*Q(2)); %Saves Area of Specific Element
for i = 1:3
for j = 1:3
C(i,j) = (1./(4*A{I})).*(P(i).*P(j) +Q(i).*Q(j));
%Calculates Individual Element Coefficient Matrix
end
end
clearvars i j
%Tested & Working To Here
%Global Coefficient Matrix:
for j = 1:3 %Runs over local node numbers for rows:
for L = 1:3
IR = TRI(I,j); %Row Index
IC = TRI(I,L); %Column Index
for k = 1:NP
if IR == Vp(k,2) %If Row is at a fixed node:
Cg(IR,IR) = 1;
B(IR,1)=Vp(k,1);
end
end
for k = 1:NP
if IC == Vp(k,2) %If Column is at a fixed node:
B(IR,1) = B(IR,1) - C(j,L)*Vp(k,1);
%if IC & IR statements are not true do this
end
end
if IR ~= Vp(k,2) && IC ~= Vp(k,2)
Cg(IR,IC) = Cg(IR,IC) + C(j,L);
end
end
end
end
Vsol = Cg \ B;
The code above does not reproduce the expected potentials when the inverse is performed (V = Cg \ B). The resulting B matrix is however tested and correct. The issue comes therefore in the calculation of the global coefficient matrix, Cg.
For rows where IR == Vp(k,2) is true, the row
Cg(IR,:) = [0,...,Irth Position, 0,,,] e.g IR = 1, Cg(1,:) = [1,0,0,0] for a system with 4 nodes
And the program appears to set these 1's correctly but I'm also getting non-zero values where I don't expect them in the resulting matrix.
Thanks for the time
2 个评论
Witold Waldman
2022-4-18
编辑:Witold Waldman
2022-4-18
Is the completed MATLAB code for the sample FORTRAN program available?
Ben Barrowes
2022-4-19
If you did have the compilable fortran code, I could use my f2matlab (fileexchange) then remgoto (homegrown tool) on your code (refactors all goto's).
Helping you is complicated by the fact that you don't use the same variable names and structure as the original code. But in general, "while", "break", and "continue" in matlab can reproduce the behavior of 100% of legal fortran goto's. PM me for more help. Otherwise, good luck!
采纳的回答
Walter Roberson
2019-9-23
The general pattern for needing to exit two layers of looping is:
need_to_exit_loop = false;
for first_variable = start_value : end_value
for second_variable = start_second : end_second
if condition_to_leave
need_to_exit_loop = true;
break;
end
end
if need_to_exit_loop
break;
end
end
2 个评论
更多回答(0 个)
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Fortran with MATLAB 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!