Poor R2019b performance with tables
8 次查看(过去 30 天)
显示 更早的评论
I read that there were improvements in table object performance in 2019b (at least with subsref stuff). I put together a simple script and directly compared r2019b to r2018b, both fresh installations.
2019b was much slower than 2018b. If this is unexpected, how can I figure out what is going wrong?
clearvars -except t
t = readtable('patients.dat');
var1 = 'Location';
var2 = 'Age';
nt = 1e4;
tic
for i=1:nt
t.Age(3) = 20;
end
fprintf('case 1: %g\n',toc);
tic
for i=1:nt
t.Location = t.Age;
end
fprintf('case 2: %g\n',toc);
tic
for i=1:nt
t.(var1) = t.(var2);
end
fprintf('case 3: %g\n',toc);
tic
for i=1:nt
t.(var2)(3) = 20;
end
fprintf('case 4: %g\n',toc);
R2018b:
case 1: 0.987709
case 2: 0.817124
case 3: 0.741722
case 4: 0.922625
R2019b:
case 1: 1.64177
case 2: 1.20244
case 3: 1.19423
case 4: 1.5782
1 个评论
Martin Lechner
2019-11-12
编辑:Martin Lechner
2019-11-12
According to the release notes of R2019b:
"However, the performance improvement occurs only when you make table subscripted assignments within a function. There is no improvement when subscripting into tables at the command line, or within try-catch blocks."
I tried to put your code into a function and got very similar results. I have only Matlab R2019a and R2019b installed. But your code runs still slower on R2019b.
I tried to modify your code, but I got always a very similar performance in R2109a and R2109b. I am not sure what this test shows because you are accessing a element of a small table multiple times. If I modify the test to access more or all elements multiple times the performance is still the same.
回答(3 个)
Campion Loong
2020-3-27
编辑:Campion Loong
2020-3-27
Hi all,
Continuing our investment in performance, R2020a has been released with more indexing improvement in table, timetable, categorical, datetime, duration and calendarDuration. Most notably for this thread, performance gain is now across all array sizes. Please refer to our Performance Release Notes for details.
Going back to JG's original timing example using a 100-row table (attacheded). In R2020a, it produces the following results -- note the improvement over the same example measured in R2018b with an identical setup:
% R2020a
>> JG_timing_example;
case 1: 0.663
case 2: 0.528
case 3: 0.405
case 4: 0.621
% R2018b
>> JG_timing_example;
case 1: 0.874
case 2: 0.668
case 3: 0.683
case 4: 0.791
Martin's example using 1e6 rows table (attached) also reveals continual improvement across consecutive releases:
% R2020a
>> MARTIN_timing_example
indexing into table: 0.634
indexing into Matlab vector: 0.008
indexing into vector in struct: 0.007
% R2019b
>> MARTIN_timing_example
indexing into table: 1.271
indexing into Matlab vector: 0.007
indexing into vector in struct: 0.007
% R2019a
>> MARTIN_timing_example
indexing into table: 51.351
indexing into Matlab vector: 0.007
indexing into vector in struct: 0.007
While there remains more work to be done, these improvements do represent our continual commitment to move performance forward in these recent data types -- ones that carry rich ecosystems to represent your data naturally and support your increasingly complex workflows.
2 个评论
Michelle Hirsch
2020-4-16
jg: I'm sorry about the impact that the 19b performance regression is having on your work. Could you say more about your license? If it's current on maintenance (or purchased within the last year), there is no charge to access new versions. Feel free to message me directly via my profile if you prefer.
Campion Loong
2019-11-20
Thank you all for keeping track of table performance.
First of all, we regret that the performance improvement in assigning into large table/timetable variables comes at the expense of a performance regression on small variables. R2019b's improvement focused only on large variables. For example, as Martin noted, subscripted assignment into variables with 1e6 rows is substantially (~40x) faster in R2019b compared to R2019a. This is true for both table and timetable, as well as other newer data types such as datetime and categorical. Because our workflows research suggested performance is more important in large variables/arrays, we made a difficult choice to deliver this substantial improvement despite the regression with small variables/arrays. However, although the regression is less substantial than the improvement, we are aware of and will address the issue in upcoming releases.
I would also stress these R2019b improvements are not a one-time effort. We have active, ongoing projects prioritizing subscripting performance of our data types. Martin is correct to note that struct and numeric arrays received very aggressive optimization after long years of existence in the language. Data types introduced more recently, such as table and datetime, have rich ecosystem to support modern analytic workflows and all of them represent data more naturally in their original form. We are continually working on deeper optimization to improve their performance as well.
To that end, please reach out to us if your workflows are notably impacted by performance in recently introduced data types (i.e. table, datetime, categorical etc.), such as those 'jg' suggested that are affecting "95% of the time" of usage. Send us your workflows on Answers, direct messages or via support. Most importantly, DO include all parts of your workflow (i.e. computations, import/export etc.) that are important to your goal -- not just subscripting alone. Often there are small changes we can recommend to notably improve performance in existing codes. Last but not least, your specific examples will go a long way in informing our development - we would very much love to learn about them!
2 个评论
Marc Elpel
2021-9-15
I am using Matlab 2021a and have the same issue with tables. Had to rewrite my code to standard matrix arrays which took a function from 7+ seconds to < 0.1xx seconds.
The code below is called repeatedly in a scheduler app.. The inputs are 4 doubles and an function handle. EventSchedule was originally a table TEventSchedule but via profiler I found this function dragging down performance. Changed to a matrix of the same columns and speed improvement as mentioned above.
function obj = CreateEvent(obj, eventTime, eventID, serverID, eventType, eventCallback)
newEvent = [eventTime, eventID, serverID, eventType, {eventCallback}];
if(isempty(obj.EventSchedule))
obj.EventSchedule = newEvent;
else
obj.EventSchedule(end+1,:) = newEvent;
end
end
I really prefer the table structure for identifying the data; by backing it out I now am dealing with a matrix of values with no internal representation of what they mean - the user/programmer has to keep track of the column order externally.
I would have expected to a table to be the same as a matrix with an associated indexing schema. In other words writing to matX(:,5) should be identical to writing to tableX(:,5), and writing to tableX.Col5(:) incrementally slower based only on the indirect addressing (lookup) of the column name.
Disappointed in this issue and spending hours rewriting my code to back tables out of all speed critical functions.
Campion Loong
2021-9-29
Hi Marc,
Thank you for sharing your workflow. I would like to better understand your performance challenge.
- This code looks like a method of an object. Do you know if it is a value or handle object? Is it possible to enumerate the class/datatypes of this object's properties (i.e. obj.EventSchedule being one of them)?
- Are the 4 double inputs all scalars?
- In your matrix work-around, did you mean you are storing the eventCallback function_handle in the same cell array as the 4 doubles, same as the newEvent variable (since function_handle is not concatenatable with a numeric matrix)?
- what is the call site of this function look like? For example, is it in some kind of GUI event node, called in a try/catch block etc.?
- Is the hotspot in this function the else branch, where obj.EventSchedule grows by 1 row every time this function is called? (I assume the if branch is done only once when the property is not assigned)
- roughly how many times is this function called and, by corollary, what's the the final size of the table/'matrix' at the end?
Is it possible to provide some sample data and code snippets to reproduce your observation on my end?
Martin Lechner
2019-11-12
To verify the promoted performance improvements I tested the example from the release notes of R2019b and compared the indexing speed in case of an array and an struct (see the code below, in the comment section the performance results are compared). In the case of an random index the performance for older releases degraded according to the release notes.
I wasn't aware of, that the performance of tables is so bad. Compared with indexing into the same struct (struct with a field Var1) the performance of tables is still more than a factor 100 slower than structs. The performance of indixing into the Matlab array directly has nearly the same performance as in a struct.
function [t, tmp, tmpStruct] = timingTest_MatlabTable()
% performance test
% I added the return valus, to ensure that the JIT doesn't throw away all calculations. because it's never been used.
% As of R2019b I didn't encountered any difference (with or without return values). I think Java's JIT is doing a much more
% aggressive optimization.
%
%{
% Example run with a typical result
[t, tmp, tmpStruct] = timingTest_MatlabTable();
% R2019b result:
indexing into table: 1.66243
indexing into Matlab vector: 0.0089993
indexing into vector in struct: 0.0091241
% R2019a result:
indexing into table: 56.3513
indexing into Matlab vector: 0.0097908
indexing into vector in struct: 0.0101078
%}
tmp = zeros(1e6,1);
t = table(tmp);
tmpStruct = struct("Var1",tmp);
indices = randi(1e6,1,10000);
tic;
for i = indices
t.Var1(i) = rand;
end
fprintf(' indexing into table: %g\n',toc);
tic;
for i = indices
tmp(i) = rand;
end
fprintf(' indexing into Matlab vector: %g\n',toc);
tic;
for i = indices
tmpStruct.Var1(i) = rand;
end
fprintf('indexing into vector in struct: %g\n',toc);
end
3 个评论
Martin Lechner
2019-11-14
My goal of this comparison was just to show the big performance difference and not to say that you should use structs instead of tables. I was surprised about the big difference.
I also thought about writing my own table class and wanted to use dynamic properties. Have you any performance comparisions for dynamic properties?
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Matrices and Arrays 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!