Problem connecting to Arduino Nano 3.0

13 次查看（过去 30 天）

显示更早的评论

Swapnil Sayan Saha 2019-12-3

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/494451-problem-connecting-to-arduino-nano-3-0

评论： Aravind 2023-12-15

采纳的回答： Swapnil Sayan Saha

在 MATLAB Online 中打开

I am trying to use an Arduino Nano 3.0 with MATLAB. I get the following error from trace:

         System wide configuration file is
         "C:\ProgramData\MATLAB\SupportPackages\R2019b\3P.instrset\arduinoide.instrset\hardware\tools\avr/etc/avrdude.conf"
         Using Port                    : COM5
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x7e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x7e
avrdude done.  Thank you.
An error occurred while uploading the sketch

I can however, use the Arduino IDE to upload code and get serial info. Note that the Nano is probably a clone and shows as FTDI USB Serial in the COM port.