Controling the pendulum of overhead crane

Question

jueves jevesion 2012-10-2

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/49636-controling-the-pendulum-of-overhead-crane

回答： Ovee Matlab 2017-8-25

Hello guys

I built an mathematical model of an gantry crane,(i used S-function). The task is to move the cart as fast as possible with minimal oscilation of the pendulum that is attached to the trolley of the crane. There should be only one PID controller that controls the position of the payload/pendulum and also reduces the oscilation. I was thinking about this. Try to imagine the block diagram :)

The reference (set value) value is the position of the pendulum [m]--->output of the PID and input to the system is [V].---> Output of the system is the angle of the pendulum. Sensor in the feedback is recalculating the angle to the position of the pendulum -----> and back to the set value ....

Does anybody has any knowledge with this?? any documentation (i found a lot but it was about controling the position of the cart)??

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

John Petersen 2012-12-3

You're asking about moving a cart with a pendulum on it and found lots of documentation, but it was about controlling the position of the cart. I think you have the answers in the documentation.

请先登录，再进行评论。

请先登录，再回答此问题。