How to convert ir speed sensor output to rpm which can be feedback through dspace ds1104?

Question

sanjaya 2019-12-14

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/496640-how-to-convert-ir-speed-sensor-output-to-rpm-which-can-be-feedback-through-dspace-ds1104

回答： Qaiser khan Bozdar 2019-12-17

I am using an ir sensor for measuring the speed which is to be feedback through ds1104 to my simulink file. But I am getting a train of pulses but unable to convert it to rpm.so please help.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sivakumar Selvam 2019-12-15

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/496640-how-to-convert-ir-speed-sensor-output-to-rpm-which-can-be-feedback-through-dspace-ds1104#answer_406409

Frequency of the pulse train is equal to the speed of the machine in RPS(Rotation per second). Dividing RPS/60=RPM. You need a frequency counter to measure the frequency of the pulse train in DS1104.

GOOD LUCK...

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Qaiser khan Bozdar 2019-12-17

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/496640-how-to-convert-ir-speed-sensor-output-to-rpm-which-can-be-feedback-through-dspace-ds1104#answer_406734

Please try a resistor on output of ir speed sensor because i had also faced this.This type of problem are arised due to some kind of load variations, weather the voltages are not complete or there is something improper wiring in a practical circuit.