Implement friction into a model, related to the velocity. (Missile Launch)

2 次查看（过去 30 天）
The Legend
The Legend 2020-1-25
编辑： Jim Riggs 2020-1-26
Does anyone know how I could implement friction into my code located down below?
The friction should be defined as: Ff_vector = - gamma * | v_vector | * v_vector, and should be substracted from the different velocity components of the missile.
The current distance and time outputs I get from running my code are (without friction implemented):
Also important to note is that there is no thrust, just a starting velocity of 2000 m/s.
The rocket also has a mass now of 500 kg.
clear;
close all;
clc;
tic
tic
aT = 0;
ad = 0;
format long
for i = [37:2:53]
r = 6371 * 10^3;
G = 6.674 * 10^-11;
M = 5.972 * 10^24;
g = (G * M)/(r^2);
theta0 = i;
ax = 0;
ay = r;
v0 = 2000;
vx0 = v0*cosd(theta0);
vy0 = v0*sind(theta0);
x = 0;
y = r;
vx = vx0;
vy = vy0;
T = 0;
dt = 0.01;
at = 0;
landed = 0;
z = 1;
while landed == 0
z = z + 1;
T = T + dt;
xo = x;
yo = y;
x = x + vx * dt;
y = y + vy * dt;
d = sqrt(x^2 + y^2);
alpha = atand(x/y);
g = (G*M)/(d^2);
gy = cosd(alpha) * g;
gx = sind(alpha) * g;
vy = vy - (gy * dt);
vx = vx - (gx * dt);
v = vx/sin(alpha);
ax = [ax, x];
ay = [ay, y];
if d < r
landed = 1;
end
end
aT = [aT, T]; % This is the list of times it took for each missile to land
distance = (alpha/360) * 2 * pi * r;
ad = [ad, distance]; % This is the list of distances each missile travelled
figure(1)
th = 2.8*pi/6:pi/500:3.1*pi/6;
xunit = r * cos(th) + 0;
yunit = r * sin(th) + 0;
figure(2)
hold on
plot(ax, ay)
toc
end
th = 2.8*pi/6:pi/500:3.1*pi/6;
xunit = r * cos(th) + 0;
yunit = r * sin(th) + 0;
plot(xunit, yunit)
hold off
legend('37 degrees', '39 degrees', '41 degrees', '43 degrees', '45 degrees', '47 degrees', '49 degrees', '51 degrees', '53 degrees', 'earth')
title('The trajectory of the different missiles')
xlabel('x(m)')
ylabel('y(m)')
toc
The desired output, with friction included should be:
Any help is immensly appreciated!
  3 个评论
显示 1更早的评论
Walter Roberson
Walter Roberson 2020-1-25
should be substracted from the different velocity components of the missile.
Would that be before or after
x = x + vx * dt;
y = y + vy * dt;
? Are you calculating the friction coefficients before moving, or are you calculating them after moving ?

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Jim Riggs
Jim Riggs 2020-1-26
This question is familiar.
look here.
  2 个评论
The Legend
The Legend 2020-1-26
This unfortunately did not help, I am unable to get the distance values that I should get, thank's for the help.
Jim Riggs
Jim Riggs 2020-1-26
编辑：Jim Riggs 2020-1-26
Assuming that the code gives you the correct answer without the friction term, to add friction do the following;
change this:
vy = vy - gy * dt;
vx = vx - gx * dt;
to this:
Vtot = sqrt(vx^2 + vy^2);
Fy = -gamma * Vtot * vy;
Fx = -gamma * Vtot * vx;
vy = vy + dt*(Fy/mass - gy);
vx = vx + dt*(Fx/mass - gx);
mass is 500 kg.
EDIT: after some thought, it ocurrs to me that the 1/mass factor could be included in gamma. There is no way for me to know. If this is the case, then omit the division by mass "/mass"

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Aerospace Applications 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by