Image Edge Detection Using Edge Function

Question

Afzal 2020-2-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/504194-image-edge-detection-using-edge-function

回答： Rajith 2023-11-19

I would like to detect edges in the image in the attached TestImage.jpg. I've highlighted my region of interest in (ROI.jpg). I would not like to use a fixed ROI matrix as different images may not always fit the mask. So I would like to do some edge detection to automatically detect my ROI. I've tried the following:

% Read image as gray scale
I = rgb2gray(imread('TestImage.jpg'));
I = im2double(I);
BW = edge(I,'Canny',0.75,sqrt(150));
image(BW,'CDataMapping','scaled')      

The results (DetectedEdges.jpg) does not seem to resolve all the edges I require. I've tried different threshold values as well. Is there a better way of getting my ROI?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2020-2-7

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/504194-image-edge-detection-using-edge-function#answer_414315

First I'd get a first shot at the mask by thresholding. Luckily much of the surround is white so thresholding will get the bottom and sides. Then I might try a texture filter, like stdfilt(), because you know your object of interest is rough while the curved bars/rods behind it are smooth. Then threshold that texture mask and AND it with your intensity thresholding mask. If that doesn't work, post the code for it and we can start tweaking it.

9 个评论
显示 7更早的评论隐藏 7更早的评论

Image Analyst 2020-2-8

在 MATLAB Online 中打开

Well Afzal, I worked on it for about a half an hour (luck for you - that's much more than I usually give people), and got this:

% Initialization steps.
clc;    % Clear the command window.
close all;  % Close all figures (except those of imtool.)
imtool close all;  % Close all imtool figures if you have the Image Processing Toolbox.
clear;  % Erase all existing variables. Or clearvars if you want.
workspace;  % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 22;
% Check that user has the Image Processing Toolbox installed.
hasIPT = license('test', 'image_toolbox');
if ~hasIPT
	% User does not have the toolbox installed.
	message = sprintf('Sorry, but you do not seem to have the Image Processing Toolbox.\nDo you want to try to continue anyway?');
	reply = questdlg(message, 'Toolbox missing', 'Yes', 'No', 'Yes');
	if strcmpi(reply, 'No')
		% User said No, so exit.
		return;
	end
end
%===============================================================================
% Read in image.
folder = pwd
baseFileName = 'TestImage.jpg';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
if ~exist(fullFileName, 'file')
	% Didn't find it there.  Check the search path for it.
	fullFileName = baseFileName; % No path this time.
	if ~exist(fullFileName, 'file')
		% Still didn't find it.  Alert user.
		errorMessage = sprintf('Error: %s does not exist.', fullFileName);
		uiwait(warndlg(errorMessage));
		return;
	end
end
originalImage = imread(fullFileName);
% Display the original image.
subplot(2, 3, 1);
imshow(originalImage);
axis('on', 'image');
caption = sprintf('Original Image : "%s"', baseFileName);
title(caption, 'FontSize', fontSize);
impixelinfo;
% Enlarge figure to full screen.
set(gcf, 'Units', 'Normalized', 'Outerposition', [0, 0.1, 1, 0.9], ...
	'Name', 'Demo by Image Analyst', 'NumberTitle', 'Off');
% Get the dimensions of the image.  numberOfColorBands should be = 3.
[rows, columns, numberOfColorBands] = size(originalImage);
if numberOfColorBands > 1
	fprintf('This image is RGB.  I will change it to gray scale.\n');
	grayImage = originalImage(:, :, 3); % blue channel seems to have the most contract.
else
	% It's already gray scale.
	grayImage = originalImage;
end
% Display the original image's histogram.
subplot(2, 3, 2);
imhist(grayImage);
grid on;
xticks(0:10:255);
title('Histogram of Gray Scale Image', 'FontSize', fontSize);
% Get bright stuff only.
whiteMask = grayImage > 160;
% Display the binary image.
subplot(2, 3, 3);
imshow(whiteMask);
% Apply a variety of pseudo-colors to the regions.
[labeledImage, numBlobs] = bwlabel(whiteMask);
fprintf('Found %d blobs in the white mask.\n', numBlobs);
coloredLabelsImage = label2rgb (labeledImage, 'hsv', 'k', 'shuffle');
% Display the pseudo-colored image.
subplot(2, 3, 3);
imshow(coloredLabelsImage);
axis('on', 'image');
caption = sprintf('White Mask');
title(caption, 'FontSize', fontSize);
% Perform a standard deviation filter.
se = strel('disk', 3, 0);
sdImage = stdfilt(grayImage, se.Neighborhood);
% Display the binary image.
subplot(2, 3, 4);
imshow(sdImage, []);
axis('on', 'image');
caption = sprintf('Texture Image');
title(caption, 'FontSize', fontSize);
% Use Image Analyst's interactive thresholding app:
% https://www.mathworks.com/matlabcentral/fileexchange/29372-thresholding-an-image
[lowThreshold, highThreshold, lastThresholdedBand] = threshold(7, 255, sdImage);
barMask = sdImage >= lowThreshold & sdImage <= highThreshold;
% Display the binary image.
subplot(2, 3, 5);
imshow(barMask, []);
axis('on', 'image');
caption = sprintf('Bar Mask from Std Dev Image');
title(caption, 'FontSize', fontSize);
% Process it to get rid of non-bar noise and clutter.
% Do a morphological closing by dilating and eroding to fill small holes.
se = strel('disk', 5, 0);
barMask = imclose(barMask, se);
% Get rid of thin lines with an opening.
barMask = imopen(barMask, se);
% Get the 4 largest blobs.
barMask = bwareafilt(barMask, 4);
% Apply a variety of pseudo-colors to the regions.
[labeledImage, numBlobs] = bwlabel(barMask);
fprintf('Found %d blobs in the white mask.\n', numBlobs);
coloredLabelsImage = label2rgb (labeledImage, 'hsv', 'k', 'shuffle');
% Display the pseudo-colored image.
subplot(2, 3, 6);
imshow(coloredLabelsImage);
axis('on', 'image');
caption = sprintf('Improved Bar Mask');
title(caption, 'FontSize', fontSize);
% Make area measurements.
[labeledImage, numBlobs] = bwlabel(barMask);
props = regionprops(labeledImage, 'Area', 'Centroid', 'Perimeter');
allAreas = [props.Area]
centroids = vertcat(props.Centroid);
xCentroids = centroids(:, 1);
yCentroids = centroids(:, 2);

Scroll the image sideways to see all of it.

Obviously it's not perfect but it's the best I could do in an hour. You can try to tweak the parameters (thresholds and filter sizes) if you want to improve it.

But rather than spend days trying to improve the segmentation, you'd be better off if you just improved your image from the start.

You can see that using thresholding to get the white didn't really perform well because there are white pixels in the bar. This is most likely due to specular reflections of your lamp off the shiny parts of your bar. You can knock these out by using a polarizer in front of your lamp and another one in front of your camrea lens that you rotate until the reflections disappear.
Also it would be good if you can use a jig so that the bar and "holder" are in the same location in the field of view. then you could use a fixed mask to erase everything known to never be part of the bar object of interest. Make the mask a little bit larger if the bar is bent or has a different size, but the fixed mask would go a long way in getting rid of the clutter around the white holder.
Also see if you can use a uniform background of a different color. For example if you didn't have that reddish (wood?) background, that would help. It would also help TREMENDOUSLY if you could use a different color background. For example a bright red, green, or some other vivid color. In that case, we could just use rgb2hsv() and threshold on the saturation channel to find the background. It would be SO MUCH easier.

Also, we would like to know if the image always has two bars in it, one bending up and the other bending down, with a seam exactly halfway vertically (like two short but wide images were stitched together). Knowing that might help with the segmentation.

Afzal 2020-2-9

在 MATLAB Online 中打开

BackgroundDetection.JPG

It's a safety critical application, so I need to be able to correctly calculate the fractions of the different materials visible in the ROI. I'm currently detecting the presence of the backgound through its low stdfilt value relative to the ROI. It's usually identified as one of the two materials of interets (Metco/Light DFL), so pixels that match the RGB signature of these but have stdfilt<1 are identified as background (See attached).

% Check for background. White stand usually detected as Metco or Light
    % DFL. Backgound has stdfilt < 1
    
    filteredImage = stdfilt(grayImage);
    possibleBackground = indMetco; 
    indBackground1=find(filteredImage(possibleBackground)<1);
    if ~isempty(indBackground1)
        indToDelete=indBackground1;
        indBackground1 = indMetco(indBackground1);
        indMetco(indToDelete) = [];
    end
    
    possibleBackground = indLightDFL; 
    indBackground2 = find(filteredImage(possibleBackground)<1);
    
    if ~isempty(indBackground2)
        indToDelete=indBackground2;
        indBackground2 = indLightDFL(indBackground2);
        indLightDFL(indToDelete) = [];
    end
    
    indBackground=[indBackground1;indBackground2];

Image Analyst 2020-2-9

Why is it impossible for you to make sure your sample is in exactly the same place each time? Don't you put the part into some kind of a jig? It would be so much easier if you could. You should try very hard to make sure that is the case. Don't just accept a crummy image capture situation without trying hard to do something to improve it.

How are the different materials in the ROI identified? By intensity? If so, it's absolutely mandatory that you

use polarizers to get rid of the specular reflections, and
take a picture of a blank gray sheet that fills the field of view so that you can divide the actual images by it to correct for lens shading (which you definitely have even if you don't realize it) and correct for illumination non-uniformity.

I've attached my tutorial to help you, plus a background correction demo. The tutorial shows you how to divide out the background so that no matter where some object is in the scene, it will have the same gray level. The demo is code that actually does it. Please review them and attach an image of your gray sheet.

Afzal 2020-2-9

编辑：Afzal 2020-2-9

在 MATLAB Online 中打开

Yes, the materials are identified through their RGB signatures, except the brown one, which has a distinct HSV signature.

Thanks for the advice. I will pursue improvements to the methods to get a polarizers and calibration using a blank grey sheet. If I understand this right, this calibration will have to be done before each set of pictures?

The rig is meant to give fix the object consistently, but the pictures seem to be oriented slightly differetly sometimes. May be due to camera positionsing. Need to investigate!

Just to test my understanding of the backgound correction, I took a couple of pictures on a white background with my phone (see attached). The shadow of the phone provides a good test for correction. Is this implementation of background correction correct? There seem to be some really bright regions forming.

backgroundImage = rgb2gray(im2double(imread('BackgroundImage.jpg')));
sampleImage = im2double(imread('SampleImage.jpg'));
maxIntensity = max(max(backgroundImage));
normalBackground = backgroundImage./maxIntensity;
correctedImage = sampleImage./normalBackground;
imwrite(correctedImage,'correctedImage.jpg')

Image Analyst 2020-2-9

编辑：Image Analyst 2020-2-9

Well at least if you can get a slightly larger mask, that would help. You could use that ot get rid of 90% of the clutter and then refine it from there. Definitely see if you can lock down everything as tight as you can. Consult your professional machine shop if you need help.

I don't think you would need to do segmentation in two different color spaces. Doing it in HSV color space alone should be fine. Whatever you do in RGB colorspace you could do probably easier in HSV color space.

You'll also want to calibrate your system. That means putting in an x-rite Color Checker Chart so that you can get calibrated and consistent HSV values and not have them change every time the lighting changes. And of course have controlled lighting, preferably in a concealed light booth where your scene is not subject to ambient lighting changes in the lab or factory.

By the way, I think you attached the wrong images. The image of the hat looks nothing like the image of that metal bar, or whatever it is, that you attached in your original post.

Afzal 2020-3-6

编辑：Afzal 2020-3-6

I have attempted a solution using a for loop over various thresholds and generating a polygon from closed white areas using mask2poly function from file exchange. I then compare the polygons with my fixed mask using region props (compare Area, Perimeter, MajorAxisLength) to see which region is most similar to my mask. So far it works well. But I want to further improve the mask boundary as there are dark regions in my ROI that get cropped out due to the threshold value that works well for most of the ROI (see DetectedROI.png).

I have attached a figure of the boundaries detected by mask2poly function for one of the ROIs, and overlayed a Savitzky-Golay filter. I want to patch the regions where there are steep changes in gradients (highlighted as the orange points), the desired result being shown by the drawn black lines. Do you know a way of doing this. I was thinking of calculating the average slope just before the gradient steepens and then continuing along the gradient until I meet the boundary again. But I would not want to do this at the edges, as the gradient is expected to steepen there. I have also attached the filtered boundary points (ROIBoundaryPoints.mat).

请先登录，再进行评论。

Answer 2

Rajith 2023-11-19

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/504194-image-edge-detection-using-edge-function#answer_1355772

在 MATLAB Online 中打开

function out = edgy(in)
    % Get the size of the input image
    [r, c] = size(in);
    
    % Create an output array that is two rows and columns smaller
    out = zeros(r-2,c-2);
    
    % Use the size of the new array for looping
    [r, c] = size(out);
    
    % Convert to double for doing calculations
    in = double(in);
    
    % Create the horizontal and vertical edge detector filters
    ex = [-1 0 1; -2 0 2; -1 0 1];
    ey = [1 2 1; 0 0 0; -1 -2 -1];
    for ii = 1:r
        for jj = 1:c
            sx = in(ii:ii+2,jj:jj+2) .* ex;
            sy = in(ii:ii+2,jj:jj+2) .* ey;
            % Calculate the output pixel value
            out(ii,jj) = sqrt(sum(sum(sx(:)))^2 + sum(sum(sy(:)))^2);
        end
    end
    % Convert back to uint8
    out = uint8(out);
end

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Image Edge Detection Using Edge Function

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

9 个评论
显示 7更早的评论隐藏 7更早的评论

更多回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

Community Treasure Hunt

Image Edge Detection Using Edge Function

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

9 个评论 显示 7更早的评论隐藏 7更早的评论

更多回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

9 个评论
显示 7更早的评论隐藏 7更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论