How to align the figure name to the left ?

158 次查看（过去 30 天）
aurora
aurora 2012-10-12
编辑： Adam Danz 2023-11-21
Hi,
How can I align the figure name or title to the left side ?
Thanks in advance
  6 个评论
显示 4更早的评论
aurora
aurora 2012-10-12
figH=figure();
set(figH,'name','mytitle','NumberTitle','off');

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Matt Fig
Matt Fig 2012-10-12
About the only thing I can think of is to buffer with spaces, but then resizing the figure wouldn't preserve this.
set(gcf,'name',' Myfig')
  2 个评论
aurora
aurora 2012-10-12
编辑：aurora 2012-10-12
Thank u @Matt Fig it's a good idea, actually it worked fine with me , but if someone else operate my file on his system then it'll appear right to him . I thought I'll find a figure property doing that , I'll better change my system language . thanks
Lucien Robinault
Lucien Robinault 2018-3-13
It look like you could try to use html to do this as explained here : https://undocumentedmatlab.com/blog/aligning-uicontrol-contents

请先登录，再进行评论。

更多回答（6 个）

Adam Danz
Adam Danz 2023-4-18
编辑：Adam Danz 2023-11-21
Ran in:
Starting in MATLAB R2020b, control the horizontal alignment of title and subtitle using the axis properties TitleHorizontalAlignment which can be set to center (default), left, or right.
Similarly, control the alignment of axis labels using the LabelHorizontalAlignment which is a property on the axis ruler.
For demos, see this Community Highlight.
(This does not affect the position of the figure name which is the original question by the OP).
tiledlayout(1,3)
ax1 = nexttile();
title('Left')
ax1.TitleHorizontalAlignment = 'left';
box on
axis square
grid on
ax2 = nexttile();
title('Center')
ax2.TitleHorizontalAlignment = 'center';
box on
axis square
grid on
ax3 = nexttile();
title('Right')
ax3.TitleHorizontalAlignment = 'right';
box on
axis square
grid on
Dimitrios Patikas
Dimitrios Patikas 2022-8-27
Ran in:
There is no way I know for adjusting the title of the figure.
The title of each graph can be adjucted by calculating the limits of the axes. For example:
subplot(3,1,1)
plot([1:pi/10:10], sin(1:pi/10:10))
LimitsX = xlim; LimitsY = ylim;
title('Left', 'HorizontalAlignment', 'left', 'position', [LimitsX(1), LimitsY(2)]);
subplot(3,1,2)
plot([1:pi/10:10], cos(1:pi/10:10))
LimitsX = xlim; LimitsY = ylim;
title('Center (default)');
subplot(3,1,3)
plot([3:pi/10:12], sin(3:pi/10:12))
LimitsX = xlim; LimitsY = ylim;
title('Right', 'HorizontAlalignment', 'right', 'position', [LimitsX(2), LimitsY(2)]);
  1 个评论
O.Hubert
O.Hubert 2023-3-28
编辑：O.Hubert 2023-3-28
Although this answer does not address the issue of the OP (which was to change the location of the figure name and not the title of the plot, i.e. having "Figure 1" left-aligned), this answer addresses the issue of setting the title plot aligned with the plot area, which may be the reason why users land on this thread.
It is a nice solution which does not require any ad-hoc setting of the location.

请先登录，再进行评论。

Azzi Abdelmalek
Azzi Abdelmalek 2012-10-12
title('yourtitle','position',[1 1])
  3 个评论
显示 1更早的评论
Azzi Abdelmalek
Azzi Abdelmalek 2012-10-12
Aurore why are you changing the location of the name?
aurora
aurora 2012-10-12
what do you mean ? if you mean why I want to change the name to the left is because I want my project interface figure to be in a good appearance

请先登录，再进行评论。

Mohamed Marei
Mohamed Marei 2013-5-11
编辑：Azzi Abdelmalek 2013-5-11
This is long overdue but I figured someone else might heed to do it:
set(title1,'Position',[4.98848 0.24 1.00011]) %%%Default setting
set(title1,'Position',[4.98848 0.34 1.00011]) %%%Shifts upward by 0.1 units
set(title1,'Position',[5.98848 0.34 0.00011]) %%%Shifts to the left by 1 unit
  1 个评论
Jonathan Broyles
Jonathan Broyles 2017-4-21
When I tried it this way, but when I pan the plot(change xlim or ylim) the title moves with it, rather than staying stationary as you would expect a title to do. R2017a

请先登录，再进行评论。

Roger Parkyn
Roger Parkyn 2020-9-14
Or just use a text label instead.
text(0.02, 1.02, 'Some Title String', 'Units', 'normalized', 'VerticalAlignment','Bottom', 'FontWeight','bold');
Sara
Sara 2021-3-23
You can change the psition based on your need by chnaging the
[0.5 1200 1.1]);
I used this in one of my codes.
title ('a','FontSize',13,'position',[0.5 1200 1.1]);
%
%

类别

在 Help Center 和 File Exchange 中查找有关 Title 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by