Radiation and convection in thermal models with different ambient and sink temperatures

23 次查看（过去 30 天）
Enrico
Enrico 2020-3-21
评论： Enrico 2020-3-31
Dear Community,
I have to implement a simple 2D steady heat conduction problem for a rectangular domain with different boundary conditions: fixed temperature on one side, perfectly insulated on another side, convection AND radiation on the other two sides.
I have already found the solution here
https://it.mathworks.com/matlabcentral/answers/479465-radiation-in-pde-thermal-model
but it seems that it works only if BOTH ambient and sink temperatures are the same (the ambient or undisturbed temperature is applied to convection and sink temperature to radiation).
In my case these two temperatures are different. Is it possible to solve it ?
Thanks in advance!
  3 个评论
显示 1更早的评论
Enrico
Enrico 2020-3-30
Just a follow-up with a further - possibly trivial - question.
I solved the problem of setting a BC with both convection AND radiation, with DIFFERENT ambient and sink temperatures, using the following instruction
applyBoundaryCondition(Fin,'neumann','edge',[1 3],...
'q',@myqfun,'g',@mygfun,'Vectorized','on');
with
function bcMatrix = mygfun(location,state)
h = 50; % Convective heat transfer coefficient [W/m^2 K]
sigma = 5.670367E-8; % Stefann-Boltzmann constant [W/(m^2 K^4)]
Tinf = 25; % External fluid temperature [°C]
Ts = 15; % External sink temperature [°C]
emiss = 0.7; % Surface emissivity [-]
g = h*Tinf+...
+(emiss*sigma*((state.u+273.15).^2+(Ts+273.15)^2).*...
((state.u+273.15)+(Ts+273.15)))*Ts;
bcMatrix = g;
end
%
function bcMatrix = myqfun(location,state)
h = 50; % Convective heat transfer coefficient [W/m^2 K]
sigma = 5.670367E-8; % Stefann-Boltzmann constant [W/(m^2 K^4)]
Tinf = 25; % External fluid temperature [°C]
Ts = 15; % External sink temperature [°C]
emiss = 0.7; % Surface emissivity [-]
q = h+emiss*sigma*((state.u+273.15).^2+(Ts+273.15)^2).*...
((state.u+273.15)+(Ts+273.15));
bcMatrix = q;
end
The previous instructions have been set by observing that heat transfer by convection and radiation from a gray diffuse surface - no emitting or participating media - can be expressed by
where
is the so called radiation heat transfer coefficient.
My (trivial) question is: how can I pass, in an efficient and possibly elegant way, the parameters, e.g. h, Ts etc., to both mygfun and myqfun ?
Thanks in advance!
Enrico

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Ravi Kumar
Ravi Kumar 2020-3-30
To pass additional parameter, wrap the functions that actually computes with the ones you specify as inputs. In your example:
...
h = 50; % Convective heat transfer coefficient [W/m^2 K]
sigma = 5.670367E-8; % Stefann-Boltzmann constant [W/(m^2 K^4)]
Tinf = 25; % External fluid temperature [°C]
Ts = 15; % External sink temperature [°C]
emiss = 0.7; % Surface emissivity [-]
mygfunInterface = @(location,state) mygfun(location,state,h,sigma,Tinf,Ts,emiss)
...
Similaraly for q functionction and use
applyBoundaryCondition(Fin,'neumann','edge',[1 3],...
'q',myqfunInterface,'g',mygfunInterface,'Vectorized','on');
And, updated the actual function to take additinal inputs:
function bcMatrix = mygfun(location,state,h,sigma,Tinf,Ts,emiss)
...
end

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Thermal Analysis 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by