plotyy with different data ranges to visually appear equal.

Question

Clifford Shelton 2012-10-23

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/51620-plotyy-with-different-data-ranges-to-visually-appear-equal

Ok. When making a line plotyy graph, the two y-axis have data with different ranges.

For example

y(1) has a range from 0:14
and 
y(2) has a range from 5.9:6.35

Because of this difference in ranges, the second line graph is generated to "float above" the first line graph in the plot.

What I want to do is have the two line graphs fit in the graph where even though they have different value ranges, one doesn't float over the other (maybe in other words to have the same local max and same local min.)

So that the value of 5.9 on y(2) will visually meet with the value of 0 on y(1) in the plotyy graph.

Any help is most appreciated!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Matt Fig 2012-10-24

Please create real example code that can be copied and pasted. Once you give code that will run so that we see what you see, then give a description of what you want to see.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Doug Hull 2012-10-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/51620-plotyy-with-different-data-ranges-to-visually-appear-equal#answer_62970

plotyy might be the function you seek!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Clifford Shelton 2012-10-24

thanks for the suggestion, but I'm using the plotyy function. I may not have made myself clear. Please see my comment to Walter Robinsons answer....I hope I'm much clearer then. Thanks for the help!

请先登录，再进行评论。

Answer 2

Walter Roberson 2012-10-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/51620-plotyy-with-different-data-ranges-to-visually-appear-equal#answer_62978

You should be able to set() the YLim properties of the two axes objects independently.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Clifford Shelton 2012-10-24

编辑：Clifford Shelton 2012-10-24

Thanks for the suggestion, there is one problem though. I'm generating a bunch of plotyy charts that all have different value ranges. And I don't even know what the value ranges will be until the graphs are generated.

For the example: data range of y(1) = 0:10

data range of y(2)= 5.9:6.3

after creating a plotyy chart the y(2) data is always plotted "floating" above my y(1) data because the y(1) graph always has an automatic Y minimum set at 0.

However The y(2) line graph however has a Y minimum that changes. (may be set at 5 or 4.5 which makes this seond line "float above" the y1 line.)

Is there anyway to code in that the y(2) Ylim properties are always set to be the local minimum and maximums of my y(2) data range?

That would be the easiest way I can think of solving this problem.

请先登录，再进行评论。