setting a timer Matlab

Question

Madison Gladstone 2020-4-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/516498-setting-a-timer-matlab

评论： Steven Lord 2020-4-9

Trying to start a timer when a button is pushed and stop the timer when the button is pushed again and store the times everytime any of the four buttons are pushed. I tried reading on the Matlab help page on how to make a timer but got lost. This is the code I have right now but the times in the command window are all over the place and are not stored when the button is turned off. Any help would be appreciated! Thanks

a = arduino; %register Arduino Uno
t = timer('StartFcn',@(~,~)disp('timer started.'),'TimerFcn',@(~,~)disp(rand(1)));
while 1==1 %make code continuous
    pin1 = readDigitalPin (a, 'D2'); %continuously read button 1 
    pin2 = readDigitalPin (a, 'D4'); %continuously read button 2 
    pin3 = readDigitalPin (a, 'D6'); %continuously read button 3 
    pin4 = readDigitalPin (a, 'D8'); %continuously read button 4 
if pin1==1 %if button 1 is pushed
    start(t);
    writeDigitalPin(a, 'D10', 1); %turn on RGB LED to green
else %when button 1 is pushed again 
    stop(t);
    writeDigitalPin(a, 'D10', 0); %RGB LED turns off
end
if pin2==1 %if button 2 is pushed
    start(t);
    writeDigitalPin(a, 'D13', 1); %turn on yellow LED
else %when button 2 is pushed again 
    stop(t);
    writeDigitalPin(a, 'D13', 0); %LED turns off
end
if pin3==1 %if button 3 is pushed
    start(t);
    writeDigitalPin(a, 'D12', 1); %turn on red LED
else %when button 3 is pushed again 
    stop(t);
    writeDigitalPin(a, 'D12', 0); %LED turns off
end
if pin4==1 %if button 4 is pushed
    start(t);
    writeDigitalPin(a, 'D11', 1); %turn on RGB LED to blue
else %when button 4 is pushed again 
    stop(t);
    writeDigitalPin(a, 'D11', 0); %RGB LED turns off
end
end

8 个评论
显示 6更早的评论隐藏 6更早的评论

Tommy 2020-4-9

在 MATLAB Online 中打开

if pin1==1 %if button 1 is pushed
    start(t);
    writeDigitalPin(a, 'D10', 1); %turn on RGB LED to green
else %when button 1 is pushed again 
    stop(t);
    writeDigitalPin(a, 'D10', 0); %RGB LED turns off
end

Based on this, if you hold down button 1, start(t) will be called over and over again. Whenever button 1 isn't being held, stop(t) will be called over and over again. If you want to treat the button like a toggle button, I think something like this would work:

button1Down = false;
button1FirstClickNext = true;
% ^ put before while loop
...
% within while loop:
if pin1 && ~button1Down %if button 1 is _newly_ pushed
    button1Down = true;
    if button1FirstClickNext
        start(t);
        writeDigitalPin(a, 'D10', 1); %turn on RGB LED to green
    else
        stop(t);
        writeDigitalPin(a, 'D10', 0); %RGB LED turns off
    end
    button1FirstClickNext = ~button1FirstClickNext;
elseif ~pin1 && button1Down %when button 1 is _newly_ released
    button1Down = false;
end

with similar code for each button. I don't think that will totally solve your problem, but let me know if the command window output at least corresponds to button pushes.

Tommy 2020-4-9

在 MATLAB Online 中打开

Oops my bad!

They are displaying random numbers, because of this line:

t = timer('StartFcn',@(~,~)disp('timer started.'),'TimerFcn',@(~,~)disp(rand(1)));
                                                                       % ^ random number

If you are just trying to get the time between button pushes, I would recommend using tic and toc instead of a timer, such as:

t1Start = tic;
...
if pin1==1 %if button 1 is pushed
    t1Start = tic;
    writeDigitalPin(a, 'D10', 1); %turn on RGB LED to green
    disp('button 1 first push')
else %when button 1 is pushed again 
    t1 = toc(t1Start)
    disp([num2str(t1) ' seconds passed between button 1 presses'])
    writeDigitalPin(a, 'D10', 0); %RGB LED turns off
    disp('button 1 second push')
end

And if you want to store all of the times for button 1, try this:

t1Start = tic;
t1 = [];
...
if pin1==1 %if button 1 is pushed
    t1Start = tic;
    writeDigitalPin(a, 'D10', 1); %turn on RGB LED to green
    disp('button 1 first push')
else %when button 1 is pushed again 
    t1 = [t1 toc(t1Start)];
    disp([num2str(t1(end)) ' seconds passed between button 1 presses'])
    writeDigitalPin(a, 'D10', 0); %RGB LED turns off
    disp('button 1 second push')
end

Hopefully this helps. I put those extra disp statements in there because I am wondering if you do still need an extra variable to keep track of the button's current state, like button1Down did above. I could be wrong again.

Geoff Hayes 2020-4-9

在 MATLAB Online 中打开

Madison - where is there code to display the time elapsed? You could use tic and toc to get that elapsed time. In this example, a simple GUI is created with two buttons - one that starts the timer and one that stops it. When the timer is started, the start timer callback fires and we call tic. When the timer is stopped, the stop timer callback fires and we call toc to get the elapsed time since the timer was started.

function elapsedTimerTest
    t = timer('StartFcn', @startCallback, 'StopFcn', @stopCallback, 'TimerFcn',@timerCallback, 'ExecutionMode', 'fixedRate');
    
    figure('Visible','on','Position',[500,500,120,100], 'MenuBar', 'none');
    uicontrol('Style','pushbutton','String','Start Timer',...
           'Position',[25,60,70,25], 'Callback', @(~,~)start(t));
    uicontrol('Style','pushbutton','String','Stop Timer',...
           'Position',[25,25,70,25], 'Callback', @(~,~)stop(t));
    elapsedTimes = [];
    function startCallback(~,~)
        tic;
    end
    function stopCallback(~,~)
       elapsedTimes = [elapsedTimes toc];
    end
    function timerCallback(~,~)
        % do nothing
    end
end

Note how the elapsedTimes array is updated every time the timer stops. The above might be helpful.

From your code, I don't really understand how the buttons work - is it possible to have 2 or more of the four buttons on at the same time? Or if one is off, does that mean another is on? Suppose button or pin3 is on then we turn it of by turning on pin1 (is this possible?). Your code would then start the timer for pin3, start the timer for pin1, and then stop the timer for pin3...which would mean the timer is stopped (since you have one timer that is shared for all pins/buttons).

Madison Gladstone 2020-4-9

Nevermind Tommy I got it all figured out!!! Thank you so much for the help!

Steven Lord 2020-4-9

在 MATLAB Online 中打开

I'm guessing that your actual application for which you want to use this technique isn't to display random numbers when a button is depressed. Can you say a little more about the actual application? It's possible that the functionality to achieve your main goal already exists and doesn't require a timer.

For example, if you wanted to record for how long the button remained depressed, instead of using a timer I would store the current time (returned by datetime('now') as a datetime array) when the button is pressed and subtract the stored time from the current time when the button is released.

rightNow = datetime('now');
pause % wait for the user to end the pause
howlong = datetime('now')-rightNow;
disp("MATLAB was paused for " + seconds(howlong) + " seconds." + newline)

请先登录，再进行评论。

请先登录，再回答此问题。

setting a timer Matlab

8 个评论
显示 6更早的评论隐藏 6更早的评论

回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

setting a timer Matlab

8 个评论 显示 6更早的评论隐藏 6更早的评论

回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

8 个评论
显示 6更早的评论隐藏 6更早的评论