How do I organise my code?

1 次查看（过去 30 天）
donghun lee
donghun lee 2020-4-30
评论： donghun lee 2020-4-30
clc
clear;
k_l = 26400; %Linear stiffness
m = 483; %Mass
f_n = sqrt(k_l/m)/(2*pi); %Natural frequency
dv = linspace(0,-1,40); % loop values for l
l = 0.01;
maxRes = zeros(length(dv),1);
count = 1;
for d = dv
Om_array = linspace(0,20,10); %in rad/s-1
A_array = linspace(0,0.06,10);
[om_array, a_array] = meshgrid(Om_array, A_array);
Response_amp = zeros(size(Om_array));
T = 130;
x0 = [0,0];
for i=1:numel(Om_array)
for j=1:numel(A_array)
Om = om_array(i,j);
A = a_array(i,j);
k_s = -(k_l*(l-d))/(4*d); %Spring stiffness
f = @(t,x) [ x(2); ...
-(2*k_s*(x(1)-(A*sin(Om*t))))* ...
(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2) - l)/ ...
(m*(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2))) ];
[t, x] = ode45(f,[100,T],x0);
Response_amp(i,j) = (max(x(:,1)) - min(x(:,1)))/2;
% xval(i) = Om/(2*pi) ;
end
end
maxRes(count) = max(Response_amp(:));
count = count+1;
end
%%%%%%%%%%%%%%figure(count)
grid on
plot(dv,maxRes, 'LineWidth', 1.5)
hold on
k_l = 26400; %Linear stiffness
m = 483; %Mass
dv = linspace(0,-1,40); % loop values for l
maxRes = zeros(length(dv),1);
count = 1;
l = 0.02;
for d = dv
Om_array = linspace(0,20,10); %in rad/s-1
A_array = linspace(0,0.06,10);
[om_array, a_array] = meshgrid(Om_array, A_array);
Response_amp = zeros(size(Om_array));
T = 130;
x0 = [0,0];
for i=1:numel(Om_array)
for j=1:numel(A_array)
Om = om_array(i,j);
A = a_array(i,j);
k_s = -(k_l*(l-d))/(4*d); %Spring stiffness
f = @(t,x) [ x(2); ...
-(2*k_s*(x(1)-(A*sin(Om*t))))* ...
(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2) - l)/ ...
(m*(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2))) ];
[t, x] = ode45(f,[100,T],x0);
Response_amp(i,j) = (max(x(:,1)) - min(x(:,1)))/2;
% xval(i) = Om/(2*pi) ;
end
end
maxRes(count) = max(Response_amp(:));
count = count+1;
end
grid on
plot(dv,maxRes,'LineWidth', 1.5)
hold on
k_l = 26400; %Linear stiffness
m = 483; %Mass
dv = linspace(0,-1,40); % loop values for l
maxRes = zeros(length(dv),1);
count = 1;
l = 0.03;
for d = dv
Om_array = linspace(0,20,10); %in rad/s-1
A_array = linspace(0,0.06,10);
[om_array, a_array] = meshgrid(Om_array, A_array);
Response_amp = zeros(size(Om_array));
T = 130;
x0 = [0,0];
for i=1:numel(Om_array)
for j=1:numel(A_array)
Om = om_array(i,j);
A = a_array(i,j);
k_s = -(k_l*(l-d))/(4*d); %Spring stiffness
f = @(t,x) [ x(2); ...
-(2*k_s*(x(1)-(A*sin(Om*t))))* ...
(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2) - l)/ ...
(m*(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2))) ];
[t, x] = ode45(f,[100,T],x0);
Response_amp(i,j) = (max(x(:,1)) - min(x(:,1)))/2;
% xval(i) = Om/(2*pi) ;
end
end
maxRes(count) = max(Response_amp(:));
count = count+1;
end
hold on
k_l = 26400; %Linear stiffness
m = 483; %Mass
dv = linspace(0,-1,40); % loop values for l
maxRes = zeros(length(dv),1);
count = 1;
l = 0.04;
for d = dv
Om_array = linspace(0,20,10); %in rad/s-1
A_array = linspace(0,0.06,10);
[om_array, a_array] = meshgrid(Om_array, A_array);
Response_amp = zeros(size(Om_array));
T = 130;
x0 = [0,0];
for i=1:numel(Om_array)
for j=1:numel(A_array)
Om = om_array(i,j);
A = a_array(i,j);
k_s = -(k_l*(l-d))/(4*d); %Spring stiffness
f = @(t,x) [ x(2); ...
-(2*k_s*(x(1)-(A*sin(Om*t))))* ...
(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2) - l)/ ...
(m*(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2))) ];
[t, x] = ode45(f,[100,T],x0);
Response_amp(i,j) = (max(x(:,1)) - min(x(:,1)))/2;
% xval(i) = Om/(2*pi) ;
end
end
maxRes(count) = max(Response_amp(:));
count = count+1;
end
grid on
plot(dv,maxRes,'LineWidth', 1.5)
grid on
plot(dv,maxRes,'LineWidth', 1.5)
h = legend('0.01', '0.02', '0.03', '0.04');
h.Title.String = 'l (m)';
set(h,'FontSize',18);
xlabel('Pretension (m)')
ylabel('The maximum response amplitude (m)')
set(gca,'FontSize',17)
Hi, all. This code shows a graph (pretension vs the maximum response amplitude) depending on the value of 'l'. I wish to vary l from 0 to 0.5 but it makes my code too long and therefore it takes ages to plot the graph.
Can anyone help me out on this please?
Thank you for your time.

请先登录，再回答此问题。

采纳的回答

Serhii Tetora
Serhii Tetora 2020-4-30
You can try do it with loop and function
clc; clear; close all;
k_l = 26400; %Linear stiffness
m = 483; %Mass
dv = linspace(0,-1,40); % loop values for l
l = 0:.01:.05;
for i = 1:length(l)
maxRes(:,i) = maxResfunc(k_l,m,dv,l(i));
end
plot(dv,maxRes,'LineWidth', 1.5)
grid on
h = legend({num2str(l')},'Location','northwest','FontSize',12);
h.Title.String = 'l (m)';
xlabel('Pretension (m)','FontSize',12)
ylabel('The maximum response amplitude (m)','FontSize',12)
function maxRes = maxResfunc(k_l,m,dv,l)
f_n = sqrt(k_l/m)/(2*pi); %Natural frequency
maxRes = zeros(length(dv),1);
count = 1;
for d = dv
Om_array = linspace(0,20,10); %in rad/s-1
A_array = linspace(0,0.06,10);
[om_array, a_array] = meshgrid(Om_array, A_array);
Response_amp = zeros(size(Om_array));
T = 130;
x0 = [0,0];
for i=1:numel(Om_array)
for j=1:numel(A_array)
Om = om_array(i,j);
A = a_array(i,j);
k_s = -(k_l*(l-d))/(4*d); %Spring stiffness
f = @(t,x) [ x(2); ...
-(2*k_s*(x(1)-(A*sin(Om*t))))* ...
(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2) - l)/ ...
(m*(sqrt((l-d)^2 + (x(1)-(A*sin(Om*t)))^2))) ];
[t, x] = ode45(f,[100,T],x0);
Response_amp(i,j) = (max(x(:,1)) - min(x(:,1)))/2;
% xval(i) = Om/(2*pi) ;
end
end
maxRes(count) = max(Response_amp(:));
count = count+1;
end
end
  1 个评论
donghun lee
donghun lee 2020-4-30
Thank you so much!! It is really helpful. I appreciate your effort.

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Programming 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by