Problems including a new KeyPressFcn to call a function in axdrag file

Question

Jose Rego Terol 2020-5-2

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/522442-problems-including-a-new-keypressfcn-to-call-a-function-in-axdrag-file

评论： Tommy 2020-5-5

Hi all,

I am using this file (axdrag) with my plot. I included new lines to call a function when the key 'g' is pressed but it does not work. There is not error, so the coding is correct, but somewhat these new lines are not doing the task in the plot.

Here is part of the code of axdrag

function axdrag(action)
    if nargin < 1
        action = 'initialize';
    end
    
    % Use these variables to change the zoom and pan amounts
    zoomFactor = 0.9;
    panFactor = 0.02;
    
    
%Code continues
    switch action
        
        case 'initialize'
            set(gca,'ButtonDownFcn','axdrag start')
            set(gcf,'KeyPressFcn','axdrag keypress')
            set(gcf,'DoubleBuffer','on')
            
        case 'start'
            set(gcbf,'Units','pixel');
            set(gca,'Units','pixel');
            set(gcbf,'WindowButtonMotionFcn','axdrag move')
            set(gcbf,'WindowButtonUpFcn','axdrag stop')
            currentPoint = get(gcbf,'CurrentPoint');
            x0 = currentPoint;
            axdrag move
            
        case 'move'
            currentPoint = get(gcbf,'CurrentPoint');
            dx = currentPoint - x0;
            x0 = currentPoint;
            ap = get(gca,'Position');
            xLim = get(gca,'XLim');
            yLim = get(gca,'YLim');
            set(gca,'XLim',xLim-(diff(xLim)*dx(1)/ap(3)), ...
                'YLim',yLim-(diff(yLim)*dx(2)/ap(4)));
            
        case 'stop'
            set(gcbf,'WindowButtonMotionFcn','')
            set(gcbf,'WindowButtonUpFcn','')
            set(gcbf,'Units','normalized');
            set(gca,'Units','normalized');
            
        case 'keypress'
            currChar = get(gcbf,'CurrentCharacter');
            if isempty(currChar)
                return
            end
            
            if currChar=='a'
                axis auto
                
            elseif currChar=='e'
                axis equal
 % Code continues
            end
    end
end

Then, I included this line, but it is doing nothing

elseif currChar=='g'
       myginput(1)

I expected to enable the selection of one point in my plot. But as I said, nothing is running.

Also, I tried with this (simpler task), but again, it does not work.

elseif currChar=='g'
       zoom on

The way I call the function in the Command Window:

plot(x,y)
axdrag

How can I call a function that works in the plot by pressing a key?

Thanks,

Jose

7 个评论
显示 5更早的评论隐藏 5更早的评论

Jose Rego Terol 2020-5-4

在 MATLAB Online 中打开

Hi, I got a problem related with this function.

So, in short, I am looking for a way to use this file axdrag in my code. I plot a signal, with spikes, and I want to be able to pan/zoom the plot, and ultimately select points (ginput) around the plot. Then, the code takes this points, creates a column vector and analize the data of the spike

This is an example of my code. In general speaking,

function plot_v1
S=load('F310120.mat');
x=S.T;
y=S.I;
plot(x,y,'b') %plot the data
[px_1]=axdrag2; %it goes to axdrag to pan,zoom the plot and ginput (px_1)
b=(px_1)+3;%takes the output of ginput (px_1) and do some stuff
c=table(b)
end

Here is the axdrag code simplified.

function [px_1]=axdrag2(action)
   
    %   Copyright 2018, The MathWorks, Inc.
    %   Ned Gulley
    persistent x0 dx
    
    if nargin < 1
        action = 'initialize';
    end
    
    % Use these variables to change the zoom and pan amounts
     zoomFactor = 0.9;
     panFactor = 0.02;
     
    % Get rid of the help window if it's being displayed
     helpTextAxis = findobj(gcbf,'Type','axes','Tag','axdraghelpaxis');
     if isempty(helpTextAxis)
         helpWasOff = 1;
     else
         helpWasOff = 0;
         delete(helpTextAxis);
     end
    
    switch action
        
        case 'initialize'
            set(gca,'ButtonDownFcn','axdrag start')
            set(gcf,'KeyPressFcn','axdrag keypress')
            set(gcf,'DoubleBuffer','on')
            
        case 'start'
            set(gcbf,'Units','pixel');
            set(gca,'Units','pixel');
            set(gcbf,'WindowButtonMotionFcn','axdrag move')
            set(gcbf,'WindowButtonUpFcn','axdrag stop')
            currentPoint = get(gcbf,'CurrentPoint');
            x0 = currentPoint;
            axdrag move
            
        case 'move'
            currentPoint = get(gcbf,'CurrentPoint');
            dx = currentPoint - x0;
            x0 = currentPoint;
            ap = get(gca,'Position');
            xLim = get(gca,'XLim');
            yLim = get(gca,'YLim');
            set(gca,'XLim',xLim-(diff(xLim)*dx(1)/ap(3)), ...
                'YLim',yLim-(diff(yLim)*dx(2)/ap(4)));
            
        case 'stop'
            set(gcbf,'WindowButtonMotionFcn','')
            set(gcbf,'WindowButtonUpFcn','')
            set(gcbf,'Units','normalized');
            set(gca,'Units','normalized');
            
        case 'keypress'
            currChar = get(gcbf,'CurrentCharacter');
            if isempty(currChar)
                return
            end
            
            if currChar=='a'
                zoom on             
            elseif currChar=='g'
             
                [px_1,~] = myginput(1,'crosshair');
            
                
            end
            
    end
    
end

But I got this error.

Output argument "px_1" (and maybe others) not assigned during call to "plot_v1>axdrag2".

Error in plot_v1 (line 11)

[px_1]=axdrag2;

The fuctions are separated (no nested functions) in the same script. I am able to run the function axdrag without the switch statement (if statement, for example), but this is a completely non sense because I want this statement to run different function by pressing keys.

How can I run this axdrag in my code, and use variables of this function in another funtion?

Tommy 2020-5-4

编辑：Tommy 2020-5-4

在 MATLAB Online 中打开

When you first call your function:

[px_1]=axdrag2;

you are calling it with no arguments. So, inside your function, this if statement evaluates to true:

if nargin < 1
    action = 'initialize';
end

and the following code runs in the switch case statement:

set(gca,'ButtonDownFcn','axdrag start')
set(gcf,'KeyPressFcn','axdrag keypress')
set(gcf,'DoubleBuffer','on')

Then the function exits, and as px_1 is never defined, you get an error.

This function, axdrag, is designed so that when you next click on the axes or press a key, the function is called again, this time with a specific argument. When you press the 'g' key, the figure's KeyPressFcn is called. The KeyPressFcn is 'axdrag keypress', a.k.a. axdrag('keypress'). There are two problems:

Will your program know what axdrag is? It won't if axdrag is not on the path somewhere, and if it is on the path, well, now the original axdrag is being used, not your updated axdrag2. You would have to change all of those 'axdrag arg1' strings to 'axdrag2 arg1'.
The idea of passing a variable out of the KeyPressFcn does not really make sense.

Note that the ability to zoom and pan are enabled by default now. If these are the only reasons you are using axdrag, I wouldn't use it.

How is your function, plot_v1(), supposed to wait until the user has pressed 'g' and then clicked in the axes before it analyzes the data? You'd either have to play around with blocking program execution or (really, the proper way to do this) set up your own KeyPressFcn to call myginput() in response to 'g' key presses and then perform the data analysis within the KeyPressFcn, or in some other function which gets called by the KeyPressFcn. In this case, plot_v1() will (probably) finish executing long before the user ever presses 'g'. Besides, the idea is to let the user press 'g' whenever they want - otherwise, you would just call ginput() right off the bat.

(edit) I would also post this and/or subsequent questions in a new post. If you comment a link here, I am more than happy to take a look!

Jose Rego Terol 2020-5-5

在 MATLAB Online 中打开

So, I solve the problem: 4 different scripts, and global variables. Without global I couldn't pass out the variables. I tried to bridge axdrag, but imposible.

function plot_v1
global u v
S=load('F310120.mat');
u=S.T;
v=S.I;
plot(u,v,'b');
axdrag;
end

axdrag

function axdrag(action)
    %   Copyright 2018, The MathWorks, Inc.
    %   Ned Gulley
%    global px_1 px_2
    persistent x0 dx
    
    if nargin < 1
        action = 'initialize';
    end
    
    % Use these variables to change the zoom and pan amounts
    zoomFactor = 0.9;
    panFactor = 0.02;
    
    % Get rid of the help window if it's being displayed
    helpTextAxis = findobj(gcbf,'Type','axes','Tag','axdraghelpaxis');
    if isempty(helpTextAxis)
        helpWasOff = 1;
    else
        helpWasOff = 0;
        delete(helpTextAxis);
    end
    
    switch action
        
        case 'initialize'
            set(gca,'ButtonDownFcn','axdrag start')
            set(gcf,'KeyPressFcn','axdrag keypress')
            set(gcf,'DoubleBuffer','on')
            
        case 'start'
            set(gcbf,'Units','pixel');
            set(gca,'Units','pixel');
            set(gcbf,'WindowButtonMotionFcn','axdrag move')
            set(gcbf,'WindowButtonUpFcn','axdrag stop')
            currentPoint = get(gcbf,'CurrentPoint');
            x0 = currentPoint;
            otherthing move
            
        case 'move'
            currentPoint = get(gcbf,'CurrentPoint');
            dx = currentPoint - x0;
            x0 = currentPoint;
            ap = get(gca,'Position');
            xLim = get(gca,'XLim');
            yLim = get(gca,'YLim');
            set(gca,'XLim',xLim-(diff(xLim)*dx(1)/ap(3)), ...
                'YLim',yLim-(diff(yLim)*dx(2)/ap(4)));
            
        case 'stop'
            set(gcbf,'WindowButtonMotionFcn','')
            set(gcbf,'WindowButtonUpFcn','')
            set(gcbf,'Units','normalized');
            set(gca,'Units','normalized');
            
        case 'keypress'
            currChar = get(gcbf,'CurrentCharacter');
            if isempty(currChar)
                return
            end
            
            if currChar=='a'
                axis auto
                
            elseif currChar=='e'
                axis equal 
              
            elseif currChar=='g' || (currChar=='G')
                if currChar == 'g'
                    first_ginput;
                else
                    second_ginput
                end

Last 2 scripts:

function first_ginput
global u h1
[px_1,~] = myginput(1,'crosshair');
h1=nearestpoint(px_1,u);
end
function second_ginput
global u v h1 h2
[px_2,~] = myginput(1,'crosshair');
h2=nearestpoint(px_2,u);
T=u(h1:h2);
I=v(h1:h2);
            [~,b]=max(I);%Finds the row (b) when I is max (a)
            Time=T(b);%Gives you the second when I is max
            Amplitude=round((max(I)),8);%Max I (rounded) of the spike
            halfMax = max(I)/2;
            
            t=table(Time,Amplitude,halfMax);
            writetable(t,'tableforme.xls','Sheet',1);
end

I tried to pass out the variable u and v using input arguments from the first script to the latest two scripts but I couldn´t do it. Global could be bad, but in my case is the best for this situation.

Thanks Tim for warning me that KeyPressFcn does not pass out variables. I did not know it.

Tommy 2020-5-5

Fantastic, happy to help!

请先登录，再进行评论。

请先登录，再回答此问题。

Problems including a new KeyPressFcn to call a function in axdrag file

7 个评论
显示 5更早的评论隐藏 5更早的评论

回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

Problems including a new KeyPressFcn to call a function in axdrag file

7 个评论 显示 5更早的评论隐藏 5更早的评论

回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

7 个评论
显示 5更早的评论隐藏 5更早的评论