Hello Federico,
if you have a spice model of the part, you can import that into simscape, and at that level of fidelity, it should include the open collector aspect (although there are no standards for vendor provided PSPICE models so you should verify).
To import a spice model, please use this documentaiton: https://www.mathworks.com/help/physmod/sps/ref/subcircuit2ssc.html
Otherwise, you will have to follow the recomendations in the comparator help file as you suspected. I have posted them here:
Modeling of the output as a controlled voltage source is representative of a totem-pole or push-pull output stage. To model a device with an open-collector:
- Connect the output pin to the base of an NPN Bipolar Transistor or PNP Bipolar Transistor block.
- Set the Output resistance parameter to a suitable value.
Regards,
Joel
