Error: The variable Calls in a parfor cannot be classified.

Question

Farshad Bolouri 2020-5-30

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/538663-error-the-variable-calls-in-a-parfor-cannot-be-classified

评论： Walter Roberson 2020-5-31

I am trying to use the "parfor" command from the parallel processing toolbox in an app that I am designing, but I am getting some errors. This is my first time using the parallel processing toolbox and I am not really familiar with the common errors. could you help me out?

%% Quail Call Detection
parfor i = 1:4
    Ispec= app.Spectrograms{i};
    if ~isempty(app.Spectrograms{i})
        spec_len=size(Ispec,2);
        spec_width=size(Ispec,1);
        %     figure();imshow(Ispec)
        
        band=round((spec_width-temp_width)/3);
        spec_seg_size=ceil(spec_len/30);
        
        call_candidates=[];
        %call_locations=[];
        no_seg=ceil(spec_len/spec_seg_size)*2-1;
        for s=1:no_seg
            spec_seg=Ispec(band:end-band,(s-1)*ceil(spec_seg_size/2)+1:min((s-1)*ceil(spec_seg_size/2)+1+spec_seg_size,spec_len));
            
            cc=xcorr2(spec_seg,template);
            cc_signal=mat2gray(max(cc));
            cc_signal=cc_signal(round(temp_length/2)-1:end-round(temp_length/2));
            
            TF = islocalmax(cc_signal,'MinProminence',0.25,'ProminenceWindow',temp_length/2);
            locs=find(TF);
            call=(((s-1)*ceil(spec_seg_size/2)+1)+locs)';
            call_candidates=[call_candidates;call];
            
            %         figure;imshow(spec_seg)
            %         x=1:length(cc_signal);
            %         figure;plot(x,cc_signal,x(TF),cc_signal(TF),'r*')
            %         waitforbuttonpress;
        end
        if ~isempty(call_candidates)
            if length(call_candidates)>1
                [L,n]=bwlabel(squareform(pdist(call_candidates))<temp_length/2,4);
                for k=1:n
                    [rows,~]=find(L==k);
                    rows=unique(rows);
                    spec_seg=Ispec(band:end-band,max(call_candidates(min(rows))-...
                        round(temp_length/2),1):min(call_candidates(min(rows))+round(temp_length/2),spec_len));
                    
                    cc=xcorr2(spec_seg,template);
                    cc_signal=mat2gray(max(cc));
                    cc_signal=cc_signal(round(temp_length/2)-1:end-round(temp_length/2));
                    
                    TF = islocalmax(cc_signal,'MinProminence',0.25,'ProminenceWindow',temp_length/2);
                    location=find(TF);
                    
                    if call_candidates(min(rows)) <round(temp_length/2)
                        call=(time(1)+(spec_duration/spec_len)*location);
                        Calls{i}=[Calls{i};call'];
                        %call_locations=[call_locations;location'];
                    else
                        call=(time(1)+(spec_duration/spec_len)*(call_candidates(min(rows))+location-round(temp_length/2)));
                        Calls{i}=[Calls{i};call'];
                        %call_locations=[call_locations;call_candidates(min(rows))+location'-round(temp_length/2)];
                    end
                    
                    %                 figure;imshow(spec_seg)
                    %                 x=1:length(cc_signal);
                    %                 figure;plot(x,cc_signal,x(TF),cc_signal(TF),'r*')
                    %                 waitforbuttonpress;
                end
            else
                spec_seg=Ispec(band:end-band,max(call_candidates(1)-round(temp_length/2),1):min(call_candidates(1)+round(temp_length/2),spec_len));
                
                cc=xcorr2(spec_seg,template);
                cc_signal=mat2gray(max(cc));
                cc_signal=cc_signal(round(temp_length/2)-1:end-round(temp_length/2));
                
                
                TF = islocalmax(cc_signal,'MinProminence',0.25,'ProminenceWindow',temp_length/2);
                location=find(TF);
                
                if call_candidates(1) <round(temp_length/2)
                    call=(time(1)+(spec_duration/spec_len)*location)';
                    Calls{i}=[Calls{i};call'];
                    %call_locations=[call_locations;location'];
                else
                    call=(time(1)+(spec_duration/spec_len)*(call_candidates(1)+location-round(temp_length/2)));
                    Calls{i}=[Calls{i};call'];
                    %call_locations=[call_locations;max(call_candidates(1)+location'-round(temp_length/2),1)];
                end
                
                %             figure;imshow(spec_seg)
                %             x=1:length(cc_signal);
                %             figure;plot(x,cc_signal,x(TF),cc_signal(TF),'r*')
                %             waitforbuttonpress;
            end
        end
        % For Drawing Bounding Boxes
        %pos{i} = [Calls{i} 1200*ones(length(Calls{i}),1) ...
        %    0.5*ones(length(Calls{i}),1) 1900*ones(length(Calls{i}),1)];
    
    %% Place Call Times into corresponding variables
    CallA = Calls{1};
    CallA(find(CallA==0)) = [];
    CallB = Calls{2};
    CallB(find(CallB==0)) = [];
    CallC = Calls{3};
    CallC(find(CallC==0)) = [];
    CallD = Calls{4};
    CallD(find(CallD==0)) = [];
     %% Drawing Lines on Calls
     if app.OffButton.Value == 1 && strcmp(app.ModeSwitch.Value,"Online")
         for row = 1:size(Calls{1},1)
             line(app.UIAxes,Calls{1}(row,:)*ones(1,length(app.F)),app.F,'Color','red','LineWidth',1.5);
         end
         for row = 1:size(Calls{2},1)
             line(app.UIAxes_2,Calls{2}(row,:)*ones(1,length(app.F)),app.F,'Color','red','LineWidth',1.5);
         end
         for row = 1:size(Calls{3},1)
             line(app.UIAxes_3,Calls{3}(row,:)*ones(1,length(app.F)),app.F,'Color','red','LineWidth',1.5);
         end
         for row = 1:size(Calls{4},1)
             line(app.UIAxes_4,Calls{4}(row,:)*ones(1,length(app.F)),app.F,'Color','red','LineWidth',1.5);
         end
     end
    end 
end
end

I am getting the following error:

Error: The variable Calls in a parfor cannot be classified.

Please let me know if you needed any exrta information.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2020-5-31

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/538663-error-the-variable-calls-in-a-parfor-cannot-be-classified#answer_443355

在 MATLAB Online 中打开

    %%Place Call Times into corresponding variables
    CallA = Calls{1};

Earlier you index Calls{i} where i is the parfor variable. Loops are not done in order, so when you go to process i=4, producing Calls{4}, then Calls{1} might not be ready yet. Inside parfor if you index a variable with the parfor index then you cannot refer to the same variable indexed at any constant index or any index that is not derived from the parfor variable.

Please also note that inside a worker, you cannot make graphics changes to the display.

It looks to me as if all that drawing code should be moved after the parfor loop.

2 个评论
显示无隐藏无

Farshad Bolouri 2020-5-31

Thank You so much, I found the problem.

I still do have a question, the program is running but im getting the following messeges and I don't really know what they mean, couold you explain please?

//

Warning: Unable to save App Designer app object. Save not supported for matlab.apps.AppBase objects.

Warning: While loading an object of class 'QuailKit':

Unable to load App Designer app object. Load not supported for matlab.apps.AppBase objects.

> In parallel.internal.pool.deserialize (line 33)

In parallel.internal.pool.deserializeFunction (line 17)

In remoteParallelFunction (line 19)

Warning: While loading an object of class 'QuailKit':

Unable to load App Designer app object. Load not supported for matlab.apps.AppBase objects.

> In parallel.internal.pool.deserialize (line 33)

In parallel.internal.pool.deserializeFunction (line 17)

In remoteParallelFunction (line 19)

Warning: While loading an object of class 'QuailKit':

Unable to load App Designer app object. Load not supported for matlab.apps.AppBase objects.

> In parallel.internal.pool.deserialize (line 33)

In parallel.internal.pool.deserializeFunction (line 17)

In remoteParallelFunction (line 19)

Warning: While loading an object of class 'QuailKit':

Unable to load App Designer app object. Load not supported for matlab.apps.AppBase objects.

> In parallel.internal.pool.deserialize (line 33)

In parallel.internal.pool.deserializeFunction (line 17)

In remoteParallelFunction (line 19)

//

Walter Roberson 2020-5-31

在 MATLAB Online 中打开

Ispec= app.Spectrograms{i};

Before the loop, extract app.Spectrograms into a separate variable that is not within app, such as

Spectrograms = app.Spectrograms;

and use that variable instead of app.Spectrograms .

That is, do not have any reference to app inside your parfor execution.

请先登录，再进行评论。

Error: The variable Calls in a parfor cannot be classified.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

2 个评论
显示无隐藏无

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Error: The variable Calls in a parfor cannot be classified.

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

2 个评论 显示 无隐藏 无

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

2 个评论
显示无隐藏无