- Make sure that you are using the latest drivers from the Vector website.
- Make sure to download the latest XL Driver library.
- Make sure that vxlapi.dll is on the system path by adding C:\XL Driver Library\bin to the system path in the Environment Variables.
- In the control panel, make sure that the hardware under Vector Hardware is listed and working properly, and that the driver is pointing to the right location.
Vehicle Networking Toolbox setup
15 次查看(过去 30 天)
显示 更早的评论
I have the Vehicle Networking toolbox for MATLAB and I am trying to make it recognize a Vector CANcaseXL. I have installed the necessary drivers for the CANcaseXL. However, I cannot establish an open channel between the toolbox and the CANcase. Here is the warning message that I received in the Matlab Command window:
>> info = canHWInfo
CAN Devices Detected:
Kvaser Devices:
Virtual 1 Channel 1
To connect, use - canChannel('Kvaser', 'Virtual 1', 1)
Virtual 1 Channel 2
To connect, use - canChannel('Kvaser', 'Virtual 1', 2)
Use GET on the output of CANHWINFO for more information.
>> canch1 = canChannel('Vector','CANcaseXL 1',1)
Warning: The following error was caught while executing 'can.vector.Channel' class destructor:
Invalid MEX-file 'C:\Program
Files\MATLAB\R2010bSP1\toolbox\vnt\vnt\mexVectorXLDriverLibrary.mexw32': The specified
module could not be found.
I checked the C:\Program Files\MATLAB\R2010bSP1\toolbox\vnt\vnt\ directory and found the right file (mexVectorXLDriverLibrary.mexw32) that needs to be there. If everything was working properly this is what I would see:
>> info = canHWInfo
CAN Devices Detected:
Vector Devices:
CANcaseXL 1 Channel 1 (SN: 24365)
To connect, use - canChannel('Vector', 'CANcaseXL 1', 1)
CANcaseXL 1 Channel 2 (SN: 24365)
To connect, use - canChannel('Vector', 'CANcaseXL 1', 2)
Virtual 1 Channel 1
To connect, use - canChannel('Vector', 'Virtual 1', 1)
Virtual 1 Channel 2
To connect, use - canChannel('Vector', 'Virtual 1', 2)
Kvaser Devices:
Virtual 1 Channel 1
To connect, use - canChannel('Kvaser', 'Virtual 1', 1)
Virtual 1 Channel 2
To connect, use - canChannel('Kvaser', 'Virtual 1', 2)
Use GET on the output of CANHWINFO for more information.
I called Matlab technical support and they said that this is a Vector driver setup issue. Then I called Vector and they said it was a Matlab issue, help!
0 个评论
采纳的回答
Arnaud Miege
2011-4-13
Which drivers are you using? What operating system? Some suggestions:
Also, how old is your CANcase XL? Are using USB 2.0 or 3.0 on your machine? Some older CANcaseXL only work with USB 2.0 and so won't work properly on newer machines. Vector can provide a flash update that updates the boot code in the CANCaseXL to work with both USB 2.0 and 3.0.
HTH,
Arnaud
0 个评论
更多回答(2 个)
Jaremy
2011-4-14
The likley solution to your issue is that setting up MATLAB for Vector hardware is a two-step process. Step one is to download and install the device drivers, as you have done. Step two is to download and make accessible to MATLAB the vxlapi.dll file from the XL Driver Library package.
Please see the installation instructions in the VNT documentation. They walk you through setting up your machine properly.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Vehicle Network Toolbox 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!