How to connect subsystems with different sample times in simulink

5 次查看（过去 30 天）

mayaka moses 2020-7-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/561584-how-to-connect-subsystems-with-different-sample-times-in-simulink

回答： Sabin 2024-1-22

Hi there!

I am developing a solid state transformer using rectifier-DAB-inverter approach. Each subsystem has its own sample time, so i use different powerguis in the subsytems. The problem is that the model is not running as desired, yet each independent subsystem tested independently works perfect. what could be the problem?

someone mentioned about using the rate transition block but it cannot be connected between subsystems.

5 个评论
显示 3更早的评论隐藏 3更早的评论

mayaka moses 2020-7-17

can I share my model so that you can look at it?

mayaka moses 2020-7-17

I cannot use atomic subsystem because of the diodes in the system.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Sabin 2024-1-22

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/561584-how-to-connect-subsystems-with-different-sample-times-in-simulink#answer_1394461

Running the system at same (fastest) rate while having different PWM switching frequency and different sampling for the control algorithm should work. The model may be slightly slower but should perform as desired.

If Simscape technology (blue blocks) is used it is possible to use Network Couplers to split physical networks:

https://www.mathworks.com/help/simscape/ug/using-network-couplers-to-split-physical-networks.html