How can I run 2 stepper motors simultaneously connected to an arduino Uno using Matlab?

14 次查看（过去 30 天）
Emmin
Emmin 2012-12-18
评论： Mohamed Ammar 2019-4-8
Hi all,
I am using a motor shield with the arduino Uno.
I want to be able to run 2 stepper motors simultaneously.
This is a code that runs the 2 motors, but not simultaneously, as in, for motor 2 to start, it has to wait for motor 1 to stop.
I have tried to use 'parfor' loops instead of 'for' loops, that didn't do the trick.
I have tried uploading an edited version of the srv.pde to integrate the I2C and AccelStepper libraries, but I'm not getting a simultaneous movement either...
I added to the srv.pde:
#include <Wire.h>
#include <AccelStepper.h>
and to the void loop (), I added:
Wire.beginTransmission (100);
and uploaded that as to the master arduino.
and uploaded to the slave arduino:
#include <Wire.h>
void setup()
{
Wire.begin(100);
Wire.onReceive(receiveEvent);
}
void loop()
{}
void receiveEvent( int howMany)
{
while (Wire.available())
{}}
I need help modifying the srv.pde so that when I upload it, I would be able to run the stepper motors simultaneously. Or another way, without having to modify the srv.pde file, to be able to run the motors simultaneously...
Thank you.
[Merged information from duplicate Question]
Hi, I have 2 arduinos, 2 motor shields, and 2 stepper motors. I want the 2 motors to run simultaneously, when I connect the 2 steppers to one arduino, the motors do not run at the same time. For example, in a for loop like this, motor 1 will run, stop, then moto 2 will run, stop.
for k=1:3;
a.stepperStep(1,'forward','double',200);
a.stepperStep(2,'forward','double',200);
end
The same issue occurs if I have 2 arduinos connected. For example, the for loop would be like this:
for k=1:3;
a.stepperStep(1,'forward','double',200);
b.stepperStep(1,'forward','double',200);
end
with "b." representing a different arduino than the "a."
Is there a way to make the 2 motors run at the same time?
Thank you.
  3 个评论
显示 1更早的评论
Emmin
Emmin 2012-12-20
Hi Jonathan. I want the 2 motors to run simultaneously, when I connect the 2 steppers to one arduino, the motors do not run at the same time. For example, in a for loop like this, motor 1 will run, stop, then moto 2 will run, stop.
for k=1:3;
a.stepperStep(1,'forward','double',200);
a.stepperStep(2,'forward','double',200);
end
The same issue occurs if I have 2 arduinos connected. For example, the for loop would be like this:
for k=1:3;
a.stepperStep(1,'forward','double',200);
b.stepperStep(1,'forward','double',200);
end
with "b." representing a different arduino than the "a."
Is there a way to make the 2 motors run at the same time?
Thank you.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Rolfe Dlugy-Hegwer
Rolfe Dlugy-Hegwer 2013-2-12
If you install the Simulink Support Package for Arduino Hardware, check out the "Drive with PID Control" tutorial example with its arduinomega2560_drive_openloop.mdl model.
To add this capability, enter "targetinstaller" in the MATLAB Command Window. Then follow the instructions in Support Package Installer.
  2 个评论
John
John 2014-11-11
Hello
I have an Arduino Uno and the Motor Shield V2 I'm able to control the two steppers with the speed and the rotation angle i want but not at the same time.The code i write at the MATLAB's M-File is this one:
% a=arduino('COM3');
a.stepperSpeed(1,10);
a.stepperSpeed(2,20);
a.stepperStep(1,'forward','single',48);
a.stepperStep(2,'forward','single',48);
The pde file that i upload the Arduino is the motor_V2.pde .
I tried to upload different pde but nothing happend.
Also I tried for Simulinks Support Package i read in another post, but the package is for MATLAB 2012 and I don't want run the motors from simulink.
Is there anyway way for run the motors simultaneously?
Thank you.
Mohamed Ammar
Mohamed Ammar 2019-4-8
im using two stepper motopr with a motor sheild l293 d, i couldnt able to run two stepper mpotor at the same time.. help me out

请先登录，再进行评论。

社区

更多回答在  Power Electronics Control

类别

在 Help Center 和 File Exchange 中查找有关 Arduino Hardware 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by