problem with reading MRI image (dicom)
7 次查看(过去 30 天)
显示 更早的评论
I use dicomread function and then the matrix seems to be ok(includes numbers >0), but when i want to display image using imshow function matlab always displays black background. I didn't have this problem with CT images. Did you have any problems like that?
0 个评论
采纳的回答
Matt Kindig
2012-12-19
Hi D C,
It's probably just a display issue. When using imshow, try setting the DisplayRange to autoscale, i.e.
imshow( DICOM_Matrix, 'DisplayRange', []);
2 个评论
更多回答(4 个)
Image Analyst
2012-12-19
You probably have a uint16 image and are only using a small fraction of the 65535 allowable gray levels. If you don't specify a display range, it will put 0 to 0 on the display, and 65535 to 255 on the display (255 is the most an 8/24/32 bit color display can display). So if your max value is, say, 3000, it will show up as 3000/65535*255 = 12 gray levels and will be very dark - practically invisible. To have it autoscale so that the 3000 will get mapped to 255, use [], like this:
imshow(yourImageArray, []);
This will also work for floating point (single, double) images, which normally will show up as all white because it expects floating point images to be in the range 0-1. Do this and tell me what it says:
whos yourImageArray
max(yourImageArray(:)) % Don't use a semicolon
min(yourImageArray(:))
4 个评论
Wes
2013-4-9
Hi there,
It seems like I have a similar problem with reading DICOMs. I have stored T2* maps in DICOM files (it is a long scan, so I have about 240 time points of each map). Matlab reads it in such a strange way, windowing however it's pleased ;-) For me, the important bit is to retain the actual voxel value when I read in images, so absolutely no scaling can be done by Matlab. Any idea how to achieve that?
Thanks!
0 个评论
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!