CIC decimator output mirrored

Question

Edson Silva 2020-7-24

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/570100-cic-decimator-output-mirrored

回答： Edson Silva 2020-7-24

normalRx.txt

Hi,

I am trying to use the dsp.CICDecimatior function and comparing the output to a C code algorithm that I have. The CIC decimator is configured as decimation of 8, 3 sections and differential delay equals 1.

below is the code used and attached I have the input vector:

CIC1 = dsp.CICDecimator(8,1,3);
CIC1.SectionWordLengths=[32 32 32 32];
CIC1.FixedPointDataType='Specify word lengths'
k=0;
step1_sig=zeros(1,128);
for i=1:16
    step1_sig(1,i)=CIC1(real(normalRx(1+k:8+k)'));
    k=k+8;
end
step1_sig'

The output looks mirrored as you can see in the figure below:

I am confident that the C code output is correct, because I have compared it to the following C++ :

https://github.com/EsonJohn/CIC-filter

Both produced the same output, so the issue have to be in my Matlab code.

Any ideas why the Matlab output is mirrored?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Edson Silva 2020-7-24

I think the answer to this question is the way the MATLAB block is implemented. In the traditional CIC decimator algorithm, the delay unit in the integrator is used in the feedback path, but in the MATLAB block it uses the unit delay in the feedforward path of the integrators:

https://www.mathworks.com/help/dsp/ref/dsp.cicdecimator-system-object.html#d120e192907

Although the filter will be equivalent (same frequency response), the numerical output of the two implementations are a different (the mirrored look that I mentioned in my question).

I don't know if there is any way of implementing the CIC in Matlab using the unit delay in the feedback.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Edson Silva 2020-7-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/570100-cic-decimator-output-mirrored#answer_470551

As it seems that the reason to the problem is the way the CIC filter is implemented in MATLAB with the unit delay in the feedforward path of the integrator, the question now becomes:

Is there a way of implementing the CIC filter with the unit delay on the FEEDBACK path of the integrator?

It should be like this: