Hi all, i have a two circles in an image which are concentric, i used a command [x,y]=ginput(1). Using the mouse pointer i click on the one of the concentric circles,with reference to the [x,y] point how to find out the inner dia,outer dia,center
3 次查看(过去 30 天)
显示 更早的评论
Is it possible to draw a circle with reference to the {[x,y]=ginput(1)} single point.
3 个评论
Walter Roberson
2012-12-24
Should the largest circle be drawn from the starting point, that just touches one (or both) of the two concentric circles ?
采纳的回答
Image Analyst
2012-12-28
Here's how to do it with ginput(1), rather than automatically, just like you asked for:
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
imtool close all; % Close all imtool figures if you have the Image Processing Toolbox.
clear; % Erase all existing variables. Or clearvars if you want.
workspace; % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 20;
imshow('C:\Users\Naresh\Documents\Temporary\intq.png');
% Ask for center using ginput(1)
message = sprintf('Please click at the center of the circles');
button = questdlg(message, 'Continue?', 'OK', 'Quit', 'OK');
drawnow; % Refresh screen to get rid of dialog box remnants.
if strcmpi(button, 'Quit')
return;
end
[xCenter, yCenter] = ginput(1)
hold on;
markerSize = 30; % Size of the cross.
lineWidth = 2; % Thickness of the cross.
plot(xCenter, yCenter, 'r+', 'MarkerSIze', markerSize, 'LineWidth', lineWidth);
% Ask for inner edge using ginput(1)
message = sprintf('Please click at the inner edge of the circles');
button = questdlg(message, 'Continue?', 'OK', 'Quit', 'OK');
drawnow; % Refresh screen to get rid of dialog box remnants.
if strcmpi(button, 'Quit')
return;
end
[xInner, yInner] = ginput(1)
% Draw a cross at the point where they clicked.
plot(xInner, yInner, 'r+', 'MarkerSIze', markerSize, 'LineWidth', lineWidth);
% Draw a line to it.
line([xCenter, xInner], [yCenter, yInner], 'Color', 'b', 'LineWidth', lineWidth);
% Calculate diameter:
innerDiameter = sqrt((xInner-xCenter)^2+(yInner-yCenter)^2)
% Ask for outer edge using ginput(1)
message = sprintf('The inner diameter = %.2f\n\nPlease click at the outer edge of the outer circles', innerDiameter);
button = questdlg(message, 'Continue?', 'OK', 'Quit', 'OK');
drawnow; % Refresh screen to get rid of dialog box remnants.
if strcmpi(button, 'Quit')
return;
end
[xOuter, yOuter] = ginput(1)
plot(xOuter, yOuter, 'r+', 'MarkerSIze', markerSize, 'LineWidth', lineWidth);
% Draw a line to it.
line([xCenter, xOuter], [yCenter, yOuter], 'Color', 'b', 'LineWidth', lineWidth);
% Calculate diameters:
outerDiameter = sqrt((xOuter-xCenter)^2+(yOuter-yCenter)^2)
innerDiameter = sqrt((xInner-xCenter)^2+(yInner-yCenter)^2)
message = sprintf('The outer diameter = %.2f\nThe inner diameter = %.2f',...
outerDiameter, innerDiameter);
uiwait(helpdlg(message));
2 个评论
FSh
2021-4-11
Is it possible to convert the x,y values obtained with ginput to pixcel values without using impixelinfo ?!
Image Analyst
2021-4-11
Yes
[xInner, yInner] = ginput(1);
row = round(yInner); % Make sure it's an integer, not a fractional value.
column = round(xInner);
pixelValue = yourImage(row, column, :)
更多回答(3 个)
Image Analyst
2012-12-25
See the FAQ: http://matlab.wikia.com/wiki/FAQ#How_do_I_create_a_circle.3F for code on how to draw circles and ellipses.
10 个评论
Image Analyst
2012-12-31
We've talked about that already. If you don't want to do it manually with ginput, then there are ways with thresholding and regionprops to find things automatically. You could also combine them if you want to find, say, just one pair of diameters rather than the whole set.
Walter Roberson
2012-12-25
With regards to your current version of the question asking whether it is possible to draw a circle with reference to ginput(1) coordinates, the answer is YES, and the method is as linked to by Image Analyst in the FAQ.
0 个评论
Walter Roberson
2012-12-25
The question you emailed me involved finding the inner and outer diameter of circles within a "bulls-eye" type pattern, and wanting to know how to find a diameter of a circle pointed to using ginput()
I would suggest that you just find all of the inner and outer diameters and then worry about the output.
To find the diameters, start by thresholding the image using "<" so that you get "true" for the dark areas. Then bwlabel() the binary image that results. regionprops() that, and request the Area and the FilledArea and the EquivDiameter. The EquivDiameter will give you the outer diameter. sqrt((Area - FilledArea) / pi) is the inner diameter and will be 0 for the innermost circle. Sort by EquivDiameter to get the order of the circles.
If you still want the user to be able to click to choose a particular point, then after the click, extract that same point from the labeled image, and the label will tell you the array index of regionprops results.
11 个评论
Image Analyst
2012-12-29
Like I said in another comment, see my code below where I use the manual method of ginput(1) like you asked for.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Image Analysis 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!