While loop not giving the correct answer
2 次查看(过去 30 天)
显示 更早的评论
Hi All,
the code below is running, HOWEVER the results are incorrect,
My condition in while is running but with wrong numbers, anyone help ??
My while condition is to get the factor results greater than 1 and smaller or equal to 1.5 HOWEVER, the results are factor =
1.0e+03 *
0.0105 2.4436
Please anyone help !!!
clearvars;
close all;
clc;
syms s real;
rr=0;
factor=[0 0]
while all(factor)>1||all(factor)<=1.5
factor=[0 0]
angle_pss=[0 45 -45 30 90;45 -45 45 90 30];
thick_pss=[.125 .15 .25 .5 1;.125 .15 .25 .5 1];
rr=rr+1
% STEP ONE
E1=1.4e3;E2=1.4e3;G12=.53e3;v12=.35;
if rr>length(angle_pss)
return
end
angle=angle_pss(:,rr)';
thickness=thick_pss(:,rr)';
% STEP TWO
S=q_cal(angle,E1,E2,G12,v12);
% STEP THREE
sigma1_c=1500; sigma2_c=246; sigma1_t=1500; sigma2_t=40; tau_12=68;
H1=(1/sigma1_t) - (1/sigma1_c); H11= 1/(sigma1_t*sigma1_c); H2=(1/sigma2_t) - (1/sigma2_c); H22=1/(sigma2_t*sigma2_c); H6=0; H66=1/(tau_12)^2;
H12=-1/2*sqrt(1/(sigma1_t*sigma1_c*sigma2_t*sigma2_c));
% STEP FOUR
[T_zinv,T_z_,Q_tran]=q_tran_cal(angle,S);
% STEP FIVE
Z=h_mid(angle,thickness);
% STEP SIX
[A,B,D]=abd_cal(angle,Z,Q_tran);
% STEP SEVEN
M=[A B;B D];
F=[0;0;0;0;0;10]; % ADD APPLIED FORCES HERE
%F=[N_x;N_y;N_xy;M_x;M_y;M_xy;]
E=M\F; % STRAIN % inv(M)*F
e=E(1:3);
k=E(4:end); % curvature
% STEP EIGHT
[sigmal_t,sigmal_m,sigmal_b]=stress_strain_cal(angle,e,Z,k,Q_tran,thickness,T_zinv,T_z_);
% STEPNINE
tsai_wu=zeros(2,1,length(angle));
for i=1:length(angle)
tsai_wu(:,:,i)=double(solve((H1*sigmal_t(1,:,i)+H2*sigmal_t(2,:,i)+H6*sigmal_t(3,:,i))*s...
+(H11*sigmal_t(1,:,i)^2+H22*sigmal_t(2,:,i)^2+H66*(sigmal_t(3,:,i)^2)+2*H12*sigmal_t(1,:,i)*sigmal_t(2,:,i))*s^2==1,s))
tsai_w=tsai_wu(find(tsai_wu(:,:,i)>0),:,i)
factor(i)=tsai_w
end
thickness
angle
end
0 个评论
回答(1 个)
Ameer Hamza
2020-9-10
The correct condition for while-loop is
while ~(all(factor>1) && all(factor<=1.5))
apart from that, there seems to be some other issue with the program logic, which never creates 'factor' fulfilling this condition.
5 个评论
Ameer Hamza
2020-9-10
Yes, I meant that the condition
~(all(factor>1) && all(factor<=1.5))
never become true. What do you expect to happen when this condition never becomes true?
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Assumptions 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!