Help with Simscape Multibody

1 次查看(过去 30 天)
I'm trying to create a simulation representing the 4 DOF for a robotic arm. My issue is in the "M3 and L3" block of my attached file. The link is using a revolute joint and I can't get it to move how I need it to. I know the direction the Z axis should be in to for the joint to move how I'd like it to but when I rotate the axis, the joint no longer works. I based my simulation off of the pendulum example provided by the Simscape Multibody tutorial videos ( https://www.youtube.com/watch?v=lItmRlH4iBw&t=448s )
The image shows how the link is currently moving and how I need it to move. I've also attached my Simscape Multibody file.

采纳的回答

J Chen
J Chen 2020-9-21
The z-axis of the revolute joint needs to align with the desired roration axis. Use the Rigid Transform block in the Simscape/Multibody/Frames and Transformation to rotate the revolute joint. You may need a Rigid Transform block at each joint of the revolute joint.

更多回答(0 个)

类别

Help CenterFile Exchange 中查找有关 Simscape Multibody 的更多信息

产品


版本

R2019b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by