HOW TO MAKE ODE14X RUN WITHOUT ERRORS?

1 次查看（过去 30 天）
Andreas
Andreas 2013-3-4
评论： doliph 2014-7-30
Derivative input 24 of 'final3opamp/N-Channel MOSFET1' at time 3.0E-7 is Inf or NaN. Stopping simulation. There may be a singularity in the solution. If not, try reducing the step size (either by reducing the fixed step size or by tightening the error tolerances).
this is the error I get. I need a discret time solver in order to get the fft of some signals in my system. i use local solver(trapezoidal and backward) but it does nt produce quite good results- it is far too digital-many pulse-like oscillations ocure.
So I only need to run the fixed step ODE14X. any ideas?
here is a similar previous post http://www.mathworks.com/matlabcentral/answers/52196-residual-norm-and-unconverged-equation-error
thank you for helping.
  2 个评论
Andreas
Andreas 2013-3-4
and when i changed the consistency tolerence to 1e-12 i get this kind of major error (which shows up in many occasions when i try to set the model up)
Steady state solve failed to converge. ...Nonlinear solver: failed to converge, residual norm too large. ......Here is the set of components with unconverged equations: 'final3opamp/N-Channel MOSFET' 'final3opamp/N-Channel MOSFET1'

请先登录，再进行评论。

请先登录，再回答此问题。

回答（2 个）

Guy Rouleau
Guy Rouleau 2013-3-8
Very likely this is because the dynamics in your model is too fast to be captured by the solver step size. You know... the Nyquist criteria.
This article should help moving from variable to fixed step:
http://www.mathworks.com/tagteam/61384_Real_Time_Simulation_Simscape_PDF.pdf
ahmed
ahmed 2013-4-17
Mr. Rouleau;
The PDF link was useful....thank you
But, still there is no direct solution to adapt the solver...! or even the system...!
My model is a Hybrid vehicle, including DC motor and Generic engine working together via PSD...the problem arises between the engine and the solver...any idea?
  1 个评论
doliph
doliph 2014-7-30
Hi ahmed,
I am doing a doing a similar simulation to you but for a fully electric vehicle. I am running into the same issues. Were you able to resolve the problem?
Cheers,
Dustin

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Simscape 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by