Hi Tapan Kumar Nayak,
I understand that you want to generate a switching pulse using GPIO with a carrier signal frequency of 9kHz, and you are encountering issues with the solver step size affecting the signal quality and processor connectivity.
I assume you are working within Simulink simulation environment targeting a TMS processor and that the correct functioning of your model depends on the simulation’s step size, which impacts the accuracy of the generated carrier signal and the connectivity with your processor.
You can consider the following to ways to deal with Step Size Adjustment:
- Solver Configuration: Ensure you are using a fixed-step solver that is capable of handling the high-frequency dynamics of your system. The step size influences both the simulation's accuracy and its computational load.
- Step Size Refinement: If a step size of (1e-6) seconds disconnects the processor and (0.5e-6) seconds distorts the signal, you might need to experiment with values in between, or even smaller, to find a balance between connectivity and signal integrity. It is a process of trial and improvement.
- Signal Generation Method: Review the method used to generate the triangular carrier signal. Ensure it is designed to produce accurate results at high frequencies and small step sizes. Sometimes, using a precomputed signal array rather than generating it on-the-fly can improve accuracy.
- Processor Load Management: Consider the computational load on the processor. High-frequency operations with small step sizes can overwhelm the processor. If possible, offload some computations or simplify the model.
- Alternative Approaches: If step size adjustments alone do not resolve the issue, consider alternative approaches for generating your switching pulse. This might include using a different signal generation technique or adjusting the model to reduce its real-time computational demands.
References:
- For understanding solver configurations and step sizes in Simulink, refer to the documentation of Simulink solvers: https://www.mathworks.com/help/simulink/ug/types-of-solvers.html.
- For guidelines on optimizing model performance in Simulink, see: https://www.mathworks.com/help/sldo/
Hope this helps!
