Thingspeak broker address not working
4 次查看(过去 30 天)
显示 更早的评论
0 个评论
采纳的回答
Christopher Stapels
2021-2-16
The mqtt broker gives really limited messages. If you had parts of the format wrong for the subscribe method, it will probably just fail silently.
Read the documentation for MQTT closely to make sure the format is correct. I havent dont the simulink example, so I would reccomend you try mqttfx or the MATLAB based MQTT client (on FEX). Once you get the syntax correct using MQTTFX or MATLAB, its usually easier to make sure you enter the correct settings in blocks in simulink.
Sadly the RPI example in the thingSpeak doc has an outdated library (to do list), but it might give you a different starting point if the simulink version wont work.
0 个评论
更多回答(3 个)
Christopher Stapels
2021-2-15
It is working great across all of my many channels, I did not see a break near the time you posted this. What command did you try to send to the server?
3 个评论
Christopher Stapels
2021-2-16
api.thingspeak.com is the RESTful service. mqtt.thingspeak.com is the correct address for the mqtt broker. If you try that address in the config settings, what do you get?
Naim Slama
2022-4-24
the same thing host broker not connected help please i want to read from thingspeak using microbit and esp01 thx
1 个评论
Vinod
2022-4-24
编辑:Vinod
2022-4-24
I'd recommend starting with reading the documentation which has some excellent examples for you to get started.
Nipuna
2022-5-12
I have used ThingSpeak for two years without any issue to send data via MQTT from my LoRa gateway.
Since last week I can not see my data publish on any of my channel. I then tested it with MQTTX app
The log files says it is publishing but the channels dont get data
Any suggestions
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/995935/image.jpeg)
2 个评论
Vinod
2022-5-12
Your topic to publish appears to be incorrect. The client should be publishing to : channels/<CHANNEL_ID>/publish
Nipuna
2022-5-12
Hi Vinod,
Thanks for the guidance, actually the error was that I put the API Write code after the Publish.
This worked after I remove the API write key, in early versions there were no MQTT device creation option. Thanks for the help.
Topic:- channels/<CHANNEL_ID>/publish
Data:- field1=45&field2=60&status=MQTTPUBLISH
社区
更多回答在 ThingSpeak Community
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Read Data from Channel 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!