Hi Palma Errico,
It is my understanding that you want to plot the “patternAzimuth” in the App Designer. To achieve this, you can use the “plot” function. Here is a sample code for the same:
% Button pushed function: Button
function ButtonPushed(app, event)
fc = 2.4e9; % Example carrier frequency of 2.4 GHz
c = 3e8;
az = linspace(-180, 180, 361);
% Define the elevation angles for the pattern
el = linspace(-90, 90, 181);
% Define the magnitude pattern for the transmitting antenna
magpatterntx = ones(181, 361);
% Define the phase pattern for the transmitting antenna
phasepatterntx = ones(181, 361);
% Create the custom antenna element
antennatx = phased.CustomAntennaElement('AzimuthAngles', az, ...
'ElevationAngles', el, 'MagnitudePattern', magpatterntx, ...
'PhasePattern', phasepatterntx);
% Plot the azimuth pattern in the UIAxes
plot(app.UIAxes, az, patternAzimuth(antennatx, fc, 'PropagationSpeed', c));
% Set the x-axis label
xlabel(app.UIAxes, 'Azimuth Angle');
% Set the y-axis label
ylabel(app.UIAxes, 'Pattern');
% Set the title
title(app.UIAxes, 'Azimuth Pattern');
end
You can refer to the following documentation to know more about the functions used:
Best Regards,
Abhishek Chakram
